Blind Communications Sytem Structures For SIMO Channels

Date

2008-04-22

Author

Karakuetuek, Serkan
Tuncer, Temel Engin

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

205
views

0
downloads

Frame based single input multi output (SIMO) communications systems are considered. In these systems frame length, offset, channel order and channel coefficients are all unknowns and there is no training session. Different system structures are considered for the estimation these unknowns blindly and best system structure is found. In addition a new method for channel order estimation is proposed.

Subject Keywords

Chromium, Estimation, Channel estimation, Signal to noise ratio, Demodulation, Helium, Communication systems

URI

https://hdl.handle.net/11511/34888

DOI

https://doi.org/10.1109/siu.2008.4632719

Collections

Department of Electrical and Electronics Engineering, Conference / Seminar

Suggestions

OpenMETU
Core

Wideband Channel Estimation With a Generative Adversarial Network Balevi, Eren; Andrews, Jeffrey G. (2021-05-01) Communication at high carrier frequencies such as millimeter wave (mmWave) and terahertz (THz) requires channel estimation for very large bandwidths at low SNR. Hence, allocating an orthogonal pilot tone for each coherence bandwidth leads to excessive number of pilots. We leverage generative adversarial networks (GANs) to accurately estimate frequency selective channels with few pilots at low SNR. The proposed estimator first learns to produce channel samples from the true but unknown channel distribution v...
SNR CALCULATION METHOD FOR REMOTE SENSING SATELLITE IMAGING SYSTEMS Turkmenoglu, Mustafa; Sengul, Orhan; Demircioglu, Erdem (2013-06-01) Signal to Noise Ratio (SNR) is a metric used to link the image quality and radiometric performance of the remote sensing imaging systems. It is one of the remote sensing imaging system's design parameters that represents the image quality. SNR calculation and analysis should be carried out at design phase of remote sensing imaging systems. This calculation and analysis are crucial for confirmation of design success. It is important to show that the light flux reaching the sensor and the generated electrons ...
Blind Channel Estimation Based on the Lloyd-Max Algorithm in Narrowband Fading Channels and Partial-Band Jamming Dizdar, Onur; Yılmaz, Ali Özgür (2012-07-01) In wireless communications, knowledge of the channel coefficients is required for coherent demodulation. In this work, a blind channel estimation method based on the Lloyd-Max algorithm is proposed for single-tap fading channels. The algorithm estimates the constellation points for the received signal using the Lloyd-Max algorithm. The algorithm is investigated for frequency hopping systems with small hop durations and operating under partial-band jamming for both detecting the jammer and estimating the cha...
Blind channel estimation based on the Lloyd-Max algorithm innarrowband fading channels and jamming Dizdar, Onur; Yılmaz, Ali Özgür; Department of Electrical and Electronics Engineering (2011) In wireless communications, knowledge of the channel coefficients is required for coherent demodulation. In this thesis, a blind channel estimation method based on the Lloyd-Max algorithm is proposed for single-tap fading channels. The algorithm estimates the constellation points for the received signal using an iterative least squares approach. The algorithm is investigated for fast-frequency hopping systems with small block lengths and operating under partial-band and partial-time jamming for both detecti...
Parallelization of noise subspace-based doa estimation algorithms on cpu and gpu Eray, Hamza; Temizel, Alptekin; Department of Modeling and Simulation (2021-2-11) Direction-of-Arrival (DOA) estimation is known as an active research area, and it is studied under array signal processing. The algorithms in this area are widely used in various applications such as sonar, search-and-rescue, navigation, and geolocation. However, achieving a real-time system performance is sometimes a challenging task for these algorithms. In this thesis, four noise subspace-based DOA estimation algorithms (PHD, MUSIC, EV, and MN) were considered and implemented in MATLAB, C/C++, and CUDA. ...

Citation Formats

S. Karakuetuek and T. E. Tuncer, “Blind Communications Sytem Structures For SIMO Channels,” 2008, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/34888.