Fatigue Resistance of 2 Different CAD/CAM Glass-Ceramic Materials Used for Single-Tooth Implant Crowns

2011-10-01
Cavusoglu, Yeliz
Sahin, Erdal
Gürbüz, Rıza
AKÇA, KIVANÇ
Show full item record
Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
188
views
0
downloads
Purpose: To evaluate the fatigue resistance of 2 different CAD/CAM in-office monoceramic materials with single-tooth implant-supported crowns in functional area.
Oral Surgery
https://hdl.handle.net/11511/35281
IMPLANT DENTISTRY
Department of Metallurgical and Materials Engineering, Article

Suggestions

STRESSES INDUCED BY DIFFERENT LOADINGS AROUND WEAK ABUTMENTS
AYDIN, AK; TEKKAYA, AE (Elsevier BV, 1992-12-01)
Stresses and deflections of abutments induced by various loadings were analyzed with a two-dimensional finite element model. The biomechanic system consisted of the mandibular posterior three-unit fixed partial denture (FPD). Four different loading types were analyzed: (1) a distributed force of 600 N; (2) concentrated nonaxial and (3) axial 300 N forces at the marginal ridge of the molar; and (4) a concentrated vertical 300 N force at the center of the pontic. All computations were conducted for three diff...
A CRITICAL REEVALUATION OF STRESSES GENERATED DURING VERTICAL AND LATERAL CONDENSATION OF GUTTA-PERCHA IN THE ROOT-CANAL
TELLI, C; GULKAN, P; Günel, Mehmet Halis (Wiley, 1994-02-01)
The finite element method was used to calculate the stresses in a maxillary canine tooth produced during lateral and vertical condensation. Description of the biological domain to be analyzed, and conversion of the manual operations of the endodontist to realistic load representation are intricate problems which must be overcome before stresses are recovered and plotted. The stresses in dentin are in general of comparable magnitudes during lateral or vertical condensation, but these magnitudes generally rem...
EFFECT OF GLASS IONOMER LINERS ON BONDING STRENGTH OF LAMINATE VENEERS
KEDICI, PS; KALIPCILAR, B; BILIR, OG (Elsevier BV, 1992-07-01)
This study compared shear bond strengths of porcelain laminate veneers, fabricated on refractory dies, which were lengthened incisally by 0.5 mm. Specimens were divided into four separate groups. In group A, the teeth were reduced 0.5 mm and the bonding was to enamel. The teeth of the remaining groups were reduced 1.0 mm and the bonding was to dentin. For two of the groups glass ionomer liners were applied before etching. Bonding to enamel was best, with cohesive fractures in porcelain. In the other groups,...
Predicting the Outcome of Limb Revascularization in Patients With Lower-extremity Arterial Trauma: Development and External Validation of a Supervised Machine-learning Algorithm to Support Surgical Decisions.
Perkins, Zane B.; Yet, Barbaros; Sharrock, Anna; Rickard, Rory; Marsh, William; Rasmussen, Todd E.; Tai, Nigel R M (Ovid Technologies (Wolters Kluwer Health), 2020-10-01)
Objectives: Estimating the likely success of limb revascularization in patients with lower-extremity arterial trauma is central to decisions between attempting limb salvage and amputation. However, the projected outcome is often unclear at the time these decisions need to be made, making them difficult and threatening sound judgement. The objective of this study was to develop and validate a prediction model that can quantify an individual patient's risk of failed revascularization. Methods: A BN progno...
Impact essential work of fracture toughness of ABS/polyamide-6 blends compatibilized with olefin based copolymers
Ozkoc, Guralp; Bayram, Göknur; Bayramli, Erdal (Springer Science and Business Media LLC, 2008-04-01)
The impact fracture toughness of acrylonitrile-styrene-butadiene/polyamide-6 (ABS/PA6) blends compatibilized with 5% by weight carbon monoxide modified ethylene-n butyl acrylate-maleic anhydride (EnBACO-MAH) or ethylene-methyl acrylate-glycidyl methacrylate (EMA-GMA) copolymers were examined as a function of blend ratio by standard Charpy tests, Essential Work of Fracture (EWF) Methodology and fracture surface morphologies. The samples were first processed in twin-screw extruder and they were subsequently i...
Citation Formats
Y. Cavusoglu, E. Sahin, R. Gürbüz, and K. AKÇA, “Fatigue Resistance of 2 Different CAD/CAM Glass-Ceramic Materials Used for Single-Tooth Implant Crowns,” IMPLANT DENTISTRY, pp. 374–378, 2011, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/35281.
METU IIS - Integrated Information Service open@metu.edu.tr