Numerical simulation of an X-wing flapping wing MAV by means of a deforming overset grid method

Numerical simulation of a flapping wing MAV based on wing deformation capture analysis Tay, Wee Beng; de Baar, Jouke H S; Perçin, Mustafa; Deng, Shuanghou; van Oudheusden, Bas W. (2016-06-14)
Numerical simulation of a type hydraulic jumps at positive steps Altan, Ayşe Burcu; Tokyay, Nuray; Department of Civil Engineering (1994)
Numerical simulation of A-type hydraulic jumps at positive steps Altan Sakarya, Ayşe Burcu; Tokyay, Nuray (2000-01-01)
Numerical simulation of various cross sectional workpieces using conventional deep drawing and hydroforming technologies Onder, Erkan; TEKKAYA, AHMET ERMAN (Elsevier BV, 2008-04-01) This study focuses on the determination of optimum sheet metal forming process and process parameters for various cross sectional workpieces by comparing the numerical results of high-pressure sheet metal forming, hydro-mechanical deep drawing (DD) and conventional DD simulations. Within the range of each cross section, depth, characteristic dimensions ratio and fillet radius have been altered systematically. Steel of types St14 and DC04 have been used as the specimen material in the numerical analyses and ...
Numerical simulation of the 2-D steady transonic potential flow including the non-isentropic formulation Hamati, Nassif E; Kaynak, Ü.; Department of Aeronautical Engineering (1991)

Citation Formats

S. Deng, M. Perçin, B. W. van Oudheusden, H. Bijl, B. Remes, and T. Xiao, “Numerical simulation of an X-wing flapping wing MAV by means of a deforming overset grid method,” 2015, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/35524.