Synthesis and characterization of Ba/MCM-41

Date

2010-01-01

Author

Kaya, Emine
Oktar, Nuray
Karakaş, Gürkan
Murtezaoglu, Kirali

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

207
views

0
downloads

Mesoporous Ba/MCM-41 type materials (Ba/MCM-41) with high Ba/Si molar ratios between 0.025 and 0.1 were synthesized by direct hydrothermal synthesis. The samples were characterized by XRD, nitrogen adsorption, TGA-DTA, FTIR, SEM-EDS, and TEM techniques. BET surface areas of samples with various Ba loadings were found between 722 and 931 m(2)/g with 28 A average pore size, which is consistent with the pore size of 30 A for pure MCM-41 samples synthesized by the same procedure. The crystal structures of synthesized MCM-41 and Ba/MCM-41 were confirmed by XRD analysis. Among the investigated Ba/MCM-41 samples, the formation of barium oxide and barium nitrate species besides silicates was also observed in the high angle region XRD patterns.

Subject Keywords

MCM-41, Hydrothermal synthesis

URI

https://hdl.handle.net/11511/37645

Journal

TURKISH JOURNAL OF CHEMISTRY

DOI

https://doi.org/10.3906/kim-1003-2

Collections

Department of Chemical Engineering, Article

Suggestions

OpenMETU
Core

Synthesis and characterization of conducting copolymers of menthyl ester of 3-thiophene acetic acid with pyrrole Kiralp, S; Alkan, S; Toppare, Levent Kamil; Cianga, I; Yagci, Y (2003-01-01) A new thiophene derivative containing menthyl group (MM) was synthesized and polymerized via chemical and electrochemical (constant current) methods. Polymers obtained and MM itself were used to synthesize copolymers with pyrrole under conditions of constant potential electrolyses. Cyclic voltammetry (CV), thermal analysis (DSC, TGA) and scanning electron microscopy (SEM) analyses were performed for the characterization of samples.
Synthesis of Bishomoinositols and an Entry for Construction of a Substituted 3-Oxabicyclo[3.3.1]nonane Skeleton BARAN, ARİF; Bekarlar, Merve; Aydin, Gokay; NEBİOĞLU, MEHMET; ŞAHİN, Ertan; Balcı, Metin (2012-02-03) 1,3,3a,7a-Tetrahydro-2-benzofuran was used as key compound for the synthesis of various bishomoinositol derivatives. The diene was subjected to an epoxidation reaction for further functionalization of the diene unit. The bisepoxide obtained was submitted to a ring-opening reaction with acid in the presence of water. Various bishomoinositols were synthesized. However, when the reaction was carried out in the presence of acetic anhydride, a substituted 3-oxabicyclo[3.3.1]nonane skeleton was formed. The mechan...
Synthesis, characterizations and investigation of thermoluminescence properties of strontium pyrophosphate doped with metals Ilkay, L. S.; ÖZBAYOĞLU, GÜLHAN; Yılmaz, Ayşen (2014-11-01) Strontium pyrophosphate, Sr2P2O7, was synthesized by solid-state synthesis method; the product was co-doped with copper-silver (Cu-Ag), copper-indium (Cu-In) and manganese-praseodymium (Mn-Pr) oxides (CuO, MnO, In2O3, Pr6O11 and AgNO3) by solid-state reaction method. The variation of dopant concentrations was investigated from 0.5 to 15% by weight. In addition to these processes, chemical characterizations of samples and the investigation of thermoluminescence (TLD) properties of strontium pyrophosphate wit...
Direct hydrothermal synthesis of palladium-incorporated silicate-structured mesoporous catalysts Sener, Canan; Doğu, Timur; Dogu, Guelsen (2007-01-01) Pd-Si-structured novel mesoporous nanocomposite catalytic materials, having quite high Pd/Si ratios, were synthesized by an acidic direct hydrothermal synthesis route. The nanocomposite catalytic materials were then characterized by XRD, XPS, EDS, nitrogen adsorption, and SEM techniques. Unlike MCM-41, the XRD patterns indicated a rather wide d((100)) band at a 2 theta value of about 1.9. The materials, with very high Pd/Si wt ratios between 1.43 and 2.66, were synthesized and had BJH surface area values be...
Synthesis and characterization of polythiophene/montmorillonite and polythiophene/polypropylene composites Dülgerbaki, Çiğdem; Küçükyavuz, Zuhal; Department of Chemistry (2006) In this study, polythiophene(PTP)/montmorillonite(MMT) nanocomposites were synthesized by in situ intercalative polymerization and chemical oxidative polymerization. In in situ intercalative polymerization method, composites containing 90 and 95% MMT were prepared. In chemical oxidative polymerization method, a series of composites ranging from 1 to 15% by weight MMT were synthesized. Thermal and morphological properties of samples were investigated by Differential Scanning Calorimeter (DSC), Thermal Gravim...

Citation Formats

E. Kaya, N. Oktar, G. Karakaş, and K. Murtezaoglu, “Synthesis and characterization of Ba/MCM-41,” TURKISH JOURNAL OF CHEMISTRY, pp. 935–943, 2010, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/37645.