Synthesis, characterizations and investigation of thermoluminescence properties of strontium pyrophosphate doped with metals

2014-11-01
Ilkay, L. S.
ÖZBAYOĞLU, GÜLHAN
Yılmaz, Ayşen
Strontium pyrophosphate, Sr2P2O7, was synthesized by solid-state synthesis method; the product was co-doped with copper-silver (Cu-Ag), copper-indium (Cu-In) and manganese-praseodymium (Mn-Pr) oxides (CuO, MnO, In2O3, Pr6O11 and AgNO3) by solid-state reaction method. The variation of dopant concentrations was investigated from 0.5 to 15% by weight. In addition to these processes, chemical characterizations of samples and the investigation of thermoluminescence (TLD) properties of strontium pyrophosphate with and without dopants were conducted. For the characterization; powder X-ray Diffraction (XRD) were implemented for phase purity of samples. Fourier Transform Infrared Spectroscopy (FTIR) was used to determine whether the bond structures were affected from the doping or not. Thermoluminescence (TLD) analyses were conducted on strontium pyrophosphate doped with different amounts of dopants for the first time. Glow curves showed that intensities were affected by different amounts of dopants. It can be concluded from that strontium pyrophosphate doped with 7% MnO and 1% Pr6O11 had the most powerful peak intensity around 160 degrees C and dosimetric property for promising application.
RADIATION PHYSICS AND CHEMISTRY

Suggestions

Synthesis of conducting block copolymers and their use in the immobilization of invertase and polyphenol oxidase enzyme
Kıralp, Senem; Kıralp, Senem; Department of Chemistry (2004)
A new thiophene derivative containing menthyl group (MM) was synthesized and polymerized via chemical and electrochemical methods. Polymers obtained and MM itself were used to synthesize copolymers with pyrrole under conditions of constant potential electrolysis. Cyclic Voltammetry, thermal analysis and scanning electron microscopy analyses were performed for the characterization of samples. Immobilization of invertase and polyphenol oxidase enzymes was performed in the matrices obtained via copolymerizatio...
Synthesis and characterization of thiophene functionalized polystyrene copolymers and their electrochemical properties
Sahin, E; Camurlu, P; Toppare, Levent Kamil; Mercore, VM; Cianga, I; Yagci, Y (Wiley, 2005-12-01)
Thiophene functionalized polystyrene samples (TFPS) were synthesized by atom transfer radical polymerization (ATRP) of styrene, followed by Suzuki coupling with 3-thiophene (Th) boronic acid. Conducting graft polymer of TFPS with thiophene was achieved at 1.5 V in tetrabutylammonium tetrafluoroborate/dichloromethane (TBAFB/DM) by electrochemical methods. Spectroelectrochemical analysis of the resulting copolymers [P(TFPS-co-Th)] reflected electronic transitions at 449, 721 and 880 nm, revealing pi - pi* tra...
Synthesis, characterization and electrochromic properties of a near infrared active conducting polymer of 1,4-di(selenophen-2-yl)-benzene
Aydemir, Kadir; Tarkuc, Simge; Durmus, Asuman; Günbaş, Emrullah Görkem; Toppare, Levent Kamil (Elsevier BV, 2008-04-15)
A novel selenophene-based monomer, 1,4-di(selenophen-2-yl)-benzene (DSB), was synthesized via Stille coupling reaction of 1,4-dibromobenzene and tributyl(2-selenophenyl)stannane. Conducting polymer (PDSB) was prepared electrochemically in the presence of tetrabutylammonium hexafluorophosphate (TBAPF(6)) as the supporting electrolyte in dichloromethane (DCM). The resulting conducting polymer was characterized by Cyclic Voltammetry, Fourier Transform Infrared and Ultraviolet-visible spectroscopy. Spectroelect...
Synthesis, characterization and electrochromic properties of conducting copolymers of terephthalic acid bis-(thiophen-3-ylmethyl)thioester with thiophene and pyrrole and conducting polymer of 1-(4-fluorophenyl)-2,5-di(thiophen-2-yl)-1h-pyrrole
Türkarslan, Özlem; Toppare, Levent Kamil; Department of Chemistry (2006)
Terephthalic acid bis-(thiophen-3-ylmethyl)thioester (TTMT) was synthesized via the reaction of thiophen-3-ylmethanethiol with terephthaloyl dichloride. Nuclear magnetic resonance (1H-NMR) and Fourier transform infrared (FTIR) spectroscopies were utilized for the characterization of the monomer. This 3-functionalized thiophene monomer was polymerized in the presence of thiophene (Th) and pyrrole (Py) upon constant potential application in acetonitrile/tetrabutylammonium tetrafluoroborate (TBAFB). The result...
Synthesis and characterization of Ba/MCM-41
Kaya, Emine; Oktar, Nuray; Karakaş, Gürkan; Murtezaoglu, Kirali (2010-01-01)
Mesoporous Ba/MCM-41 type materials (Ba/MCM-41) with high Ba/Si molar ratios between 0.025 and 0.1 were synthesized by direct hydrothermal synthesis. The samples were characterized by XRD, nitrogen adsorption, TGA-DTA, FTIR, SEM-EDS, and TEM techniques. BET surface areas of samples with various Ba loadings were found between 722 and 931 m(2)/g with 28 A average pore size, which is consistent with the pore size of 30 A for pure MCM-41 samples synthesized by the same procedure. The crystal structures of synth...
Citation Formats
L. S. Ilkay, G. ÖZBAYOĞLU, and A. Yılmaz, “Synthesis, characterizations and investigation of thermoluminescence properties of strontium pyrophosphate doped with metals,” RADIATION PHYSICS AND CHEMISTRY, pp. 55–60, 2014, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/35605.