Synthesis and Characterization of Aluminum Containing Silica Aerogel Catalysts for Degradation of PLA

2019-05-01
Sivri, Seda
Dilek Hacıhabiboğlu, Çerağ
Sezgi, Naime Aslı
Show full item record
Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
314
views
0
downloads
Aluminum loaded silica aerogel based catalysts were synthesized by impregnation of aluminum into silica aerogel produced using sol-gel method in different aluminum loadings (2.5-15 wt%) to investigate their performances in degradation of polylactic acid (PLA).
General Chemical Engineering
https://hdl.handle.net/11511/42421
INTERNATIONAL JOURNAL OF CHEMICAL REACTOR ENGINEERING
Department of Chemical Engineering, Article

Suggestions

Characterization of BPN Pyrotechnic Composition Containing Micro- and Nanometer-Sized Boron Particles
Koc, Suzan; Ulaş, Abdullah; Yilmaz, Nil Ezgi (Wiley, 2015-10-01)
The effect of micro- and nanometer-sized boron particles on boron-potassium nitrate (BPN) ignition composition was investigated in this paper. As a starting point, thermochemical calculations were made to determine the most promising ignition compositions. Both stoichiometric and fuel-rich formulations of BPN were produced to observe the performance variation due to boron content. Particle morphology of boron particles and the surface structure of the ignition compositions were investigated by SEM. The infl...
Purification and modification of bentonite and its use in polypropylene and linear low density polyethylene matrix nanocomposites
Seyidoğlu, Tijen; Yılmazer, Ülkü; Department of Chemical Engineering (2010)
The potential use of Reşadiye/Tokat bentonite as a reinforcement in polypropylene (PP) and linear low density polyethylene (LLDPE) polymer matrix nanocomposites filler was investigated. At first, organoclays (OC) were prepared by cation exchange reaction (CER) between the raw bentonite (RB) and three quaternary ammonium salts with long alkyl tails (QA): hexadecyl trimethyl ammonium bromide [HMA] [Br], tetrabutyl ammonium tetrafluoroborate [TBA] [BF4], tetrakisdecyl ammonium bromide [TKA] [Br] and one quater...
Development and application of novel bio-magnetic membrane capsules for the removal of the cationic dye malachite green in wastewater treatment
Ali, Imran; Peng, Changsheng; Naz, Iffat; Lin, Dichu; Saroj, Devendra P.; Ali, Mohsin (Royal Society of Chemistry (RSC), 2019-01-29)
Novel bio-magnetic membrane capsules (BMMCs) were prepared by a simple two-step titration-gel cross-linking method using a polyvinyl alcohol (PVA) and sodium alginate (SA) matrix to control the disintegration of phytogenic magnetic nanoparticles (PMNPs) in an aqueous environment, and their performance was investigated for adsorbing cationic malachite green (MG) dye from water. The prepared BMMCs were characterized by FTIR, powder XRD, SEM, EDX, XPS, VSM and TGA techniques. The findings revealed that the hys...
Production and characterization of polypropylene/organoclay nanocomposites
Yayla, Saniye; Yılmazer, Ülkü; Department of Chemical Engineering (2007)
Polypropylene, PP, based nanocomposites were produced via melt blending method by using twin-screw extrusion in this study. The effects of organoclay type, compatibilizer type, and mixing order of components on the morphology, thermal, mechanical and flow properties of ternary nanocomposites were investigated. Terpolymer of ethylene/butyl acrylate/maleic anhydride, ethylene/methyl acrylate/glycidyl methacrylate, and copolymer of ethylene/glycidyl methacrylate elastomers were used as compatibilizer, whereas ...
DEPENDENCY OF NANOFLUID RHEOLOGY ON PARTICLE SIZE AND CONCENTRATION OF VARIOUS METAL OXIDE NANOPARTICLES
YAPICI, Kerim; Osturk, Ozge; Uludağ, Yusuf (FapUNIFESP (SciELO), 2018-04-01)
Impact of the nanoparticle size and concentration on the rheology of ethylene glycol based nanofluids containing nanoparticles of five different metal oxides is investigated. Particle mass concentrations ranged from 5 to 20 wt %. Types of the nanoparticles and their particle size are TiO2 (30 nm, 50 nm), MgO (20 nm, 40 nm), ZnO (10-30 nm, 35-45 nm, 80-200 nm), SiO2 (20-30 nm, 60-70 nm) and CuO (40 nm, 80 nm). A stress controlled rheometer fitted with a cone-and-plate system is employed for the rheological c...
Citation Formats
S. Sivri, Ç. Dilek Hacıhabiboğlu, and N. A. Sezgi, “Synthesis and Characterization of Aluminum Containing Silica Aerogel Catalysts for Degradation of PLA,” INTERNATIONAL JOURNAL OF CHEMICAL REACTOR ENGINEERING, pp. 0–0, 2019, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/42421.
METU IIS - Integrated Information Service open@metu.edu.tr