Yielding of two-layer shrink-fitted composite tubes subject to radial pressure

Date

2005-12-01

Author

Eraslan, Ahmet Nedim

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

279
views

0
downloads

Yielding of two-layer shrink-fitted composite tubes with axially constrained ends subject to either internal or external pressure is investigated in detail. In the framework of small deformations, a state of plane strain and von Mises yield criterion, analytical expressions are obtained for critical values of the pressure leading to plastic flow. It is shown that, depending on material properties and tube dimensions, different modes of plastic deformation may occur. Yielding may commence at the inner tube or at the outer tube or simultaneously in both tubes. The conditions for different nature of plastic flow are determined. Using analytical expressions obtained for critical values of the parameters and properties of real engineering materials, various numerical examples are handled and the variation of elastic limit pressure with interference and interface radius is explained.

Subject Keywords

General Engineering

URI

https://hdl.handle.net/11511/43811

Journal

FORSCHUNG IM INGENIEURWESEN-ENGINEERING RESEARCH

DOI

https://doi.org/10.1007/s10010-005-0001-5

Collections

Department of Engineering Sciences, Article

Suggestions

OpenMETU
Core

RECONSTRUCTION OF PERMITTIVITY AND CONDUCTIVITY PROFILES OF A DIELECTRIC SLAB IN THE TIME DOMAIN BY DESCENT METHODS ONDER, M; Kuzuoğlu, Mustafa (Institution of Engineering and Technology (IET), 1992-10-01) An optimisation approach is presented for the problem of reconstructing the permittivity and conductivity profiles of a dielectric slab from the reflected and transmitted field data. The problem is treated as an optimal control problem where the norm of the difference of measured and calculated boundary data is minimised subject to the state equation governing the system. The original constrained optimisation problem is reduced to the evaluation of stationary points of an augmented functional which is obtai...
On annular disks of variable thickness subjected to external pressure Eraslan, Ahmet Nedim (Springer Science and Business Media LLC, 2004-02-01) Exact solutions are obtained for the elastic stress distribution in variable thickness annular disks under external pressure. Two different thickness functions both in parabolic form are considered. It is shown that, depending on the geometric parameters describing the shape of the disk profile, the plastic deformation in the variable thickness annular disk commences at the inner or at the outer or simultaneously at both surfaces. The critical values of the geometric parameters which cause the plastic defor...
Damage diagnosis in frame structures with a dynamic response method Akgün, Müşerref Asuman; Ju, Fudong (Informa UK Limited, 1990-6) The dynamic response of planar frame structures composed of damped Bernoulli-Euler beams is computed, with and without a crack present in the structure. The inertance changes due to the crack are investigated in relation to the crack location, with the aim of developing a diagnosis method. The optimum excitation location and frequency and the optimum locations for response measurement are determined for best diagnosis results. The effects of crack location and severity and of damping are investigated. Dampi...
THERMAL-STRESSES IN A HEAT GENERATING ELASTIC-PLASTIC CYLINDER WITH FREE ENDS ORCAN, Y (Elsevier BV, 1994-06-01) The exact solution of the distribution of stress and deformation in an elastic-perfectly plastic cylindrical rod with uniform internal heat generation under generalized plane strain condition is presented. The treatment is based on Tresca's yield condition and the associated flow rule. The stress image points of the outer and inner plastic regions lie on two different edges of Tresca prism. With increasing heat generation parameter, the image points of the intermediate regions spread out through two side re...
A computational procedure for estimating residual stresses and secondary plastic flow limits in nonlinearly strain hardening rotating shafts Eraslan, Ahmet Nedim (Springer Science and Business Media LLC, 2005-03-01) A computational procedure to estimate the residual stress distributions and the limit angular speeds for avoiding secondary plastic deformation in nonlinearly strain hardening rotating elastic-plastic shafts is given. The model is based on von Mises yield condition, J(2) deformation theory and a Swift-type hardening law. The boundary value problem for the governing nonlinear differential equation is solved by a shooting method using Newton iterations with numerically approximated tangent. Solid as well as h...

Citation Formats

A. N. Eraslan, “Yielding of two-layer shrink-fitted composite tubes subject to radial pressure,” FORSCHUNG IM INGENIEURWESEN-ENGINEERING RESEARCH, pp. 187–196, 2005, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/43811.