Development of a Wing Preliminary Structural Analysis code

Download
index.pdf
2002-05-01
Yaman, Yavuz
Show full item record
Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
73
views
0
downloads
Aerospace Engineering
https://hdl.handle.net/11511/44767
JOURNAL OF AIRCRAFT
Department of Aerospace Engineering, Article

Suggestions

Development of de-icing and anti-icing solutions for aircraft on ground and analysis of their flow instability characteristics
Körpe, Durmuş Sinan; Özgen, Serkan; Department of Aerospace Engineering (2008)
In this thesis, development process of de-icing and anti-icing solutions and their flow instability characteristics are presented. In the beginning, the chemical additives in the solutions and their effects on the most critical physical properties of the solutions were investigated. Firstly, chemical additives were added to glycol and water mixtures at different weight ratios one by one in order to see their individual effects. Then, the changes in physical properties were observed when the chemicals were a...
Design and analysis of a mode-switching micro unmanned aerial vehicle
Cakici, Ferit; Leblebicioğlu, Mehmet Kemal (SAGE Publications, 2016-12-01)
In this study, design and analysis of a mode-switching vertical take-off and landing (VTOL) unmanned aerial vehicle (UAV) with level flight capability is considered. The design of the platform includes both multirotor and fixed-wing (FW) conventional airplane structures; therefore named as VTOL-FW. The aircraft is modeled using aerodynamical principles including post-stall conditions. Trim conditions are obtained by solving constrained optimization problems. Linear analysis techniques are utilized for trim ...
Development of control allocation methods for satellite attitude control
Elmas, Tuba Çiğdem; Tekinalp, Ozan; Department of Aerospace Engineering (2010)
This thesis addresses the attitude control of satellites with similar and dissimilar actuators and control allocation methods on maneuvering. In addition, the control moment gyro (CMG) steering with gyroscopes having limited gimbal angle travel is also addressed. Full Momentum envelopes for a cluster of four CMG's are obtained in a pyramid type mounting arrangement. The envelopes when gimbal travel is limited to plus-minus 90 degree are also obtained. The steering simulations using Moore Penrose (MP) pseudo...
Design and analysis of a structural component of a heavy transport aircraft
Çıkrıkcı, Davut; Yaman, Yavuz; Department of Aerospace Engineering (2010)
This thesis aims to present the design and analysis of a structural component of a heavy transport aircraft. The designed component is the “coupling“ which is the interface member connecting two frames or two stringers in the fuselage assembly. The “frames”, which are the circumferential stiffeners, are joined together by the “frame couplings”. The “stringers”, which are the longitudinal stiffeners, are joined together by the “stringer couplings”. At the preliminary design phase; the structural design princ...
Investigation of rotor wake interactions in helicopters using 3d unsteady free vortex wake methodology
Yemenici, Öznur; Uzol, Oğuz; Department of Aerospace Engineering (2010)
This thesis focuses on developing and examining the capabilities of a new in-house aerodynamic analysis tool, AeroSIM+, and investigating rotor-rotor aerodynamic interactions for two helicopters, one behind the other in forward flight. AeroSIM+ is a 3-D unsteady vortex panel method potential flow solver based on a free vortex wake methodology. Validation of the results with the experimental data is performed using the Caradonna-Tung hovering rotor test case. AeroSIM+ code is improved for forward flight cond...
Citation Formats
Y. Yaman, “Development of a Wing Preliminary Structural Analysis code,” JOURNAL OF AIRCRAFT, pp. 512–514, 2002, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/44767.
METU IIS - Integrated Information Service open@metu.edu.tr