A study of pilot size rapid sand filtration column performance dependence upon temperature.

Date

1987

Author

Köse, Gülfem

Metadata

Show full item record

Item Usage Stats

URI

https://hdl.handle.net/11511/4603

Collections

Suggestions

A comparative study of wake interactions between wind-aligned and yawed wind turbines using LES and actuator line models Önel, Hüseyin Can; Tuncer, İsmail Hakkı (2020-09-01)
A study of site response analysis for vertically propacating shear waves. Tekin, Muhammed Duran; Department of Civil Engineering (1980)
A Comparative Study of Effects of Additive Particle Size and Content on Wetting Behavior and Brazing Performance of C/SiC Composite Saltik, Simge; ESEN, ZİYA; Dericioğlu, Arcan Fehmi (2022-10-01) This study has focused on the influence of size and content of SiC particle incorporation on the wetting behavior of the Ticusil brazing filler alloy and on its brazing performance in C/SiC composite/Ti6Al4V alloy joints. The effect of the size and content of additive SiC particles on the variation of molten brazing filler alloy contact angle was recorded at various brazing time and temperatures. Moreover, the microstructural evolution and mechanical properties of the additive containing C/SiC composite/Ti6...
A study of the effect anisotropy on the yield condition by simulated biaxial tests on aluminum specimens. Feke, Şadi; Department of Mechanical Engineering (1965)
A Study of steam assisted gravity drainage performance in the presence of non-condensable gases Canbolat, Serhat; Akın, Serhat; Department of Petroleum and Natural Gas Engineering (2001)

Citation Formats

G. Köse, “A study of pilot size rapid sand filtration column performance dependence upon temperature.,” Middle East Technical University, 1987.