Process efficiency characterization of plastic medium tricking filters

Download
005459.pdf
1989
Üçüncü, Ayşen
Show full item record
77
views
0
downloads
https://hdl.handle.net/11511/4613
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Process synthesis studies in batch distillation column design and operation
Alkaya, Dilek; Gürkan, Türker; Özgen, Canan; Department of Chemical Engineering (1997)
Process simulation and paint thickness measurement for robotic spray painting
Arıkan, Mehmet Ali Sahir; Balkan, Raif Tuna (2001-01-01)
A method and a computer program are developed for modeling of spray painting process, simulation of robotic spray painting, off-line programming of industrial robots and paint thickness measurement for painting of curved surfaces. The computer program enables the user to determine the painting strategies, parameters and paths. Surface models of the parts that are to be painted are obtained by using a CAD software. For paint thickness measurements, probe of the coating thickness measurement gage is attached ...
Process Development for the Fabrication of a Three Axes Capacitive MEMS Accelerometer
Aydemir, Akin; Akın, Tayfun (2015-09-09)
This paper presents a new approach for the fabrication of a three-axis capacitive MEMS accelerometer that is capable of differentially sensing the acceleration in all three orthogonal axes. For the first time in literature, differential sensing for the out of plane direction is achieved by defining a movable sensing electrode on the structural layer of the SOI wafer that is sandwiched between two stationary electrodes defined on the glass substrate and the handle layer of the SOI wafer enabling the differen...
Process design for low temperature drying and carbonisation of Seyitömer lignite for the production of lump size smokeless fuel.
Ali, Ahmet Ersan; Department of Chemical Engineering (1977)
Process characterization of composite structures manufactured using resin impregnation techniques
Miskbay, Adem Onur; Parnas, Kemal Levend; Department of Mechanical Engineering (2009)
The aim of this study is to investigate and compare the properties of two layer carbon epoxy composite plates manufactured using various resin impregnation techniques; Resin Transfer Molding (RTM), Light RTM (LRTM), Vacuum Assisted RTM (VARTM) and Vacuum Packaging (VP). Throughout the study a different packaging method was developed and named Modified Vacuum Packaging (BP). The mechanical properties of composite plates manufactured are examined by tensile tests, compressive tests, in-plane shear tests and t...
Citation Formats
A. Üçüncü, “Process efficiency characterization of plastic medium tricking filters,” Middle East Technical University, 1989.
METU IIS - Integrated Information Service open@metu.edu.tr