373 MHZ 0.5 Watts-2238 MHZ 1 Watt solid state frequency multiplier.

1970
Karadeniz, Mahmut
Show full item record
78
views
0
downloads
https://hdl.handle.net/11511/4696
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Series Active Filter Based Resonance Damping of High Power Three-phase, LCL Filtered, Grid Connected Voltage Source Inverters
Usluer, S. Nadir; Hava, Ahmet Masum (2014-06-04)
A series active filter (SAF) based method for the damping of resonant harmonics created by the LCL-filter of the grid connected PWM-VSI is proposed. Oscillations in multi-megawatt rated high power inverters with LCL-filters are damped with resistors which create undesired power losses typically up to 1% of the rated power of the system. The method stated in this paper overcomes the stability/oscillation problem while providing a solution to the resistive power loss. The proposed SAF compensated system perfo...
Induction type watt-hour meter.
Kiciman, Gunay; Department of Electrical Engineering (1965)
Uncertainty Analysis of Heat Transfer Predictions Using Statistically Modeled Data From a Cooled 1-1/2 Stage High-Pressure Transonic Turbine
Kahveci, Harika Senem (ASME International, 2014-06-01)
This paper compares predictions from a 3D Reynolds-averaged Navier-Stokes code and a statistical representation of measurements from a cooled 1-1/2 stage high-pressure transonic turbine to quantify predictive process sensitivity. A multivariable regression technique was applied to both the inlet temperature measurements obtained at the inlet rake, the wall temperature, and heat transfer measurements obtained via heat-flux gauges on the blade airfoil surfaces. By using the statistically modeled temperature p...
Relay-Assisted Beamforming for Multicast Systems with Energy Harvesting Capability
Demir, Özlem Tuğfe; Tuncer, Temel Engin (2016-05-19)
In this paper, multi-group multicasting scenario is considered where single antenna sources transmit their own information to different groups of users with the help of single antenna relays. Users have energy harvesting capability, i.e., a part of the received signal is used for information decoding while the rest is used for energy harvesting. Beamforming is performed by the relays which use amplify-and-forward protocol. The design of complex relay coefficients and power splitting ratios for the users is ...
340 GHz imaging system for detection of concealed threat objects at 5 meters stand-off distance (Conference Presentation)
YILDIRIM, İHSAN OZAN; ÖZKAN, VEDAT ALİ; TAKAN, TAYLAN; ŞAHİN, ASAF BEHZAT; Altan, Hakan (2017-01-27)
A THz active scanned imaging system is developed for detection of concealed threat objects at a stand-off distance of 5 meters. Single pixel, active imaging system utilizes a continuous wave transceiver unit operating at 340 GHz, based on RF components and Schottky diode rectifiers. The transceiver has a heterodyne detection geometry and has 7 mW total power output which is derived from a 3dB directional coupler (25 dB directivity) and a horn antenna. 2D opto-mechanical scanning is performed using two mirro...
Citation Formats
M. Karadeniz, “373 MHZ 0.5 Watts-2238 MHZ 1 Watt solid state frequency multiplier.,” Middle East Technical University, 1970.
METU IIS - Integrated Information Service open@metu.edu.tr