Electrochemical polymerization and characterization of polyether-substituted aniline derivatives

Date

2007-08-01

Author

Tirkeş, Süha
Oenal, Ahmet M.

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

355
views

0
downloads

New compounds consisting of aniline units linked by polyether bridges have been synthesized and their electrochemical polymerization was performed via constant potential electrolysis and cyclic voltammetry in an aqueous solution containing 3.0 moI L-1 H2SO4. Chemical polymerization was carried out using (NH4)(2)S2O8 as oxidizing agent. It was found that both methods gave the same polymer product without any cleavage of the polyether bridge between aniline rings. The polymers were characterized using the Fourier transform infrared spectroscopic technique and the thermal behavior of electrochemically prepared polymers was investigated using thermogravimetric analysis. Spectroelectrochemical properties of the films were investigated using the in situ UV-visible spectroscopic technique. (c) 2007 Society of Chemical Industry.

Subject Keywords

Polymers and Plastics

URI

https://hdl.handle.net/11511/47158

Journal

POLYMER INTERNATIONAL

DOI

https://doi.org/10.1002/pi.2240

Collections

Welding Technology and Nondestructive Testing Research and Application Center (KTTMM), Article

Suggestions

OpenMETU
Core

Electrochemical synthesis of crowned conducting polymers : nature of radical cations in polymerization and mechanism of conductivity Cihaner, Atilla; Önal, Ahmet Muhtar; Department of Chemistry (2004) Poly(dibenzo-18-crown-6) (Poly(DB18C6)) was synthesized by electrochemical oxidation of dibenzo-18-crown-6 (DB18C6) using a mixture of acetonitrile and dichloromethane as solvent and tetrabutylammonium tetrafluoroborate (TBABF4) or tetrabutylammonium hexafluorophosphate (TBAPF6) as supporting electrolyte. The anodic polymerization of DB18C6 was investigated using in-situ ESR and in-situ UV-VIS spectroscopic techniques. Spectroelectrochemical (SPEL) properties and thermal analysis of the resulting polymers h...
Electroactive macromonomers based on pyrrole and thiophene: a versatile route to conducting block and graft polymers Yagci, Y; Toppare, Levent Kamil (Wiley, 2003-10-01) The synthesis of block and graft copolymers containing insulating and conducting polypyrrole or polythiophene segments via a two-step procedure is described. Synthetic pathways to prepare pyrrole and thiophene functional macromonomers involving conventional and controlled/living polymerizations such as anionic and cationic ring opening, atom transfer radical polymerization are discussed. The use of these macromonomers in subsequent electrochemical and chemical polymerizations, leading to the formation of co...
Synthesis and characterization of thiophene functionalized polystyrene copolymers and their electrochemical properties Sahin, E; Camurlu, P; Toppare, Levent Kamil; Mercore, VM; Cianga, I; Yagci, Y (Wiley, 2005-12-01) Thiophene functionalized polystyrene samples (TFPS) were synthesized by atom transfer radical polymerization (ATRP) of styrene, followed by Suzuki coupling with 3-thiophene (Th) boronic acid. Conducting graft polymer of TFPS with thiophene was achieved at 1.5 V in tetrabutylammonium tetrafluoroborate/dichloromethane (TBAFB/DM) by electrochemical methods. Spectroelectrochemical analysis of the resulting copolymers [P(TFPS-co-Th)] reflected electronic transitions at 449, 721 and 880 nm, revealing pi - pi* tra...
Electrosynthesis of polyfuran in acetonitrile-boron trifluoride-ethyl ether mixture and its device application Tirkeş, Süha; Önal, Ahmet Muhtar (Wiley, 2007-01-15) Electrochemical polymerization of furan was achieved in acetonitrile/boron trifluoride/ethyl ether (CH3 CN/BF3/EE) mixture in the presence of tetrabutylammonium tetrafluoroborate via constant potential electrolysis at 1.4 V versus Ag/AgCl. Electrochemical behavior of furan was investigated in the same solvent mixture of varying ratios, utilizing cyclic voltammetry. Free-standing polyfuran (PFu) films were obtained in CH3CN/BF3/EE mixture (2/4/4; v/v/v) and characterized using FTIR spectroscopic technique. S...
Synergistic effect of boron containing substances on flame retardancy and thermal stability of clay containing intumescent polypropylene nanoclay composites Dogan, Mehmet; Bayramlı, Erdal (Wiley, 2011-12-01) The functions of nanoclay and three different boron containing substances, zinc borate (ZnB), borophosphate (BPO(4)), and boron silicon containing preceramic oligomer (BSi), were studied to improve the flame retardancy of polypropylene (PP)-nanoclay-intumescent system composed of ammonium polyphosphate (APP) and pentaerythritol (PER). The flame retardancy of PP composites was investigated using limiting oxygen index (LOI), UL-94 standard, thermogravimetric analysis (TGA), and cone calorimeter.

Citation Formats

S. Tirkeş and A. M. Oenal, “Electrochemical polymerization and characterization of polyether-substituted aniline derivatives,” POLYMER INTERNATIONAL, pp. 1040–1044, 2007, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/47158.