On the critical speed of continuous shaft-disk systems

1984-01-01
Özgüven, Hasan Nevzat
Show full item record
Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
53
views
0
downloads
The critical speed of a shaft-disk system can be approximately determined from a single degree-of-freedom model. The errors in the critical speed predictions obtained from such a model are investigated. The percentage errors are plotted against disk to shaft mass ratio for different bearings and various disk locations.
Disks, Errors, Bearings, Degrees of freedom
https://hdl.handle.net/11511/47333
JOURNAL OF VIBRATION ACOUSTICS STRESS AND RELIABILITY IN DESIGN-TRANSACTIONS OF THE ASME
Department of Mechanical Engineering, Article

Suggestions

A First-Order Linear Model for the Estimation of Detonation Velocity
Türker, Burhan Lemi (Informa UK Limited, 2011-01-01)
A linear multivariable model has been derived for the estimation of detonation velocity. Then, its two simplified forms, first-order linear models, have been proposed as estimators of detonation velocities of a large population of explosives having different skeletal structures. Then, the models are analyzed mathematically and regression equations are obtained and discussed. The first model possesses two independent variables E/M and density, whereas the second one is based on E/M only. The total energy (E)...
On the wake pattern of symmetric airfoils for different incidence angles at Re=1000
Kurtuluş, Dilek Funda (SAGE Publications, 2016-06-01)
In the current study, numerical simulations are performed in order to investigate effects of incidence angle and airfoil thickness on alternating vortex pattern of symmetric airfoils at Re = 1000. This alternating vortex pattern is found to be significantly varying in shape as the incidence angle increases. The results are obtained with 1 degrees increment from 0 degrees to 41 degrees and then with 10 degrees increment from 40 degrees until 180 degrees. The instantaneous and mean vortex patterns are investi...
A simplified procedure for estimating the inelastic drift demands on frame structures
Ay, Bekir Özer (null; 2008-10-17)
On Baseline Corrections and Uncertainty in Response Spectra for Baseline Variations Commonly Encountered in Digital Accelerograph Records
Akkar, Dede Sinan; Boore, David M. (Seismological Society of America (SSA), 2009-06-01)
Most digital accelerograph recordings are plagued by long-period drifts, best seen in the velocity and displacement time series obtained from integration of the acceleration time series. These drifts often result in velocity values that are nonzero near the end of the record. This is clearly unphysical and can lead to inaccurate estimates of peak ground displacement and long-period spectral response. The source of the long-period noise seems to be variations in the acceleration baseline in many cases. These...
A model for predicting vertical component peak ground acceleration (PGA), peak ground velocity (PGV), and 5% damped pseudospectral acceleration (PSA) for Europe and the Middle East
Ertuğrul, Zehra; Kale, Ozkan; SANDIKKAYA, MUSTAFA ABDULLAH (2017-07-01)
In this study, we present a ground-motion model for the vertical component of peak ground acceleration, peak ground velocity, and 5% damped pseudo acceleration response spectra at periods ranging from 0.01 to 4 s. The vertical model is based on the ground-motion models previously developed for the horizontal component and vertical-to-horizontal ratio of ground motion by Akkar et al. (Bull Earthq Eng 12:359-387, 2014a; 517-547, 2014b) rather than on an independent regression analysis of strong-motion data av...
Citation Formats
H. N. Özgüven, “On the critical speed of continuous shaft-disk systems,” JOURNAL OF VIBRATION ACOUSTICS STRESS AND RELIABILITY IN DESIGN-TRANSACTIONS OF THE ASME, pp. 59–61, 1984, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/47333.
METU IIS - Integrated Information Service open@metu.edu.tr