Active filter synthesis using uniformly distiburted RC elements.

Date

1971

Author

Peker, Ali H

Metadata

Show full item record

Item Usage Stats

URI

https://hdl.handle.net/11511/5002

Collections

Suggestions

Active RC synthesis with moderate gain controlled sources. Gülçür, Halil Özcan; Department of Electrical Engineering (1970)
Active network synthesis using crystal resonators. Geçkil, Fikret; Department of Electrical Engineering (1971)
Active Vibration Suppression of a Smart Beam by Using an LQG Control Algorithm Onat, Cem; Şahin, Melin; Yaman, Yavuz (2011-06-22) The aim of this study was to design and experimentally apply a Linear Quadratic Gaussian (LQG) controller for the active vibration suppression of a smart beam. The smart beam was a cantilever aluminum beam with eight symmetrically located surface-bonded PZT (Lead-Zirconate-Titanate) patches which were utilized both as sensor or actuator depending on their location. A group of PZT patches closed to the root of the beam was used as actuators in the bimorph configuration and a single patch was nominated as a s...
Active clamp/reset forward converter with ZCS/ZVS self-driven synchronous rectifier for low output voltage applications Benlier, Emre; Çadırcı, Işık; Department of Electrical and Electronics Engineering (2000)
ACTIVE VIBRATION SUPPRESSION OF A SMART BEAM VIA PID CONTROLLERDESIGNED THROUGH WEIGHTED GEOMETRIC CENTER METHOD Turan, Abdullah; Şahin, Melin; Onat, Cem (null; 2019-09-18)

Citation Formats

A. H. Peker, “Active filter synthesis using uniformly distiburted RC elements.,” Middle East Technical University, 1971.