Torsion in reinforced concrete beam girder systems.

1970
Çataloğlu, Altay
Show full item record
93
views
0
downloads
https://hdl.handle.net/11511/5111
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Torsional response of seismic isolated buildings considering actual distribution of design coefficient of friction among curved surface sliders
Yaşar, Uğur Sergen; Dicleli, Murat; Department of Engineering Sciences (2021-9-3)
In this study, torsional response of seismic isolated buildings with curved surface slider (CSS) isolators are investigated considering actual distribution of design coefficient of friction in the CSS isolator. For this purpose, experimental results are used to characterize frictional properties of CSS isolator. Then, nonlinear response history analyses are performed using three-dimensional model of 3 structures that are developed based on a hospital structure. Torsional response of the structures and the p...
Creep deformation in reinforced concrete beams.
Atımtay, Ergin; Department of Civil Engineering (1967)
Flexural cracking in partially prestresses concrete beams.
Keyder, Engin; Ersoy, Uğur; Department of Civil Engineering (1972)
TORSION TEST OF COMPOSITE BEAMS USING FIBER BRAGG GRATING SENSORS FOR STRUCTURAL HEALTH MONITORING APPLICATIONS
Karataş, Cansu; Değerliyurt, Boray; Yaman, Yavuz; Şahin, Melin (null; 2017-09-23)
Fiber Bragg Grating sensors are commonly being used for Structural Health Monitoring of aeronautical structures. Fiber Bragg Grating sensors are convenient especially for Structural Health Monitoring of composite structures, such as helicopter blades and wind turbine blades, considering the ability of embedment between the layers. In this study, a Structural Health Monitoring system of composite beams equipped with surface bonded and embedded Fiber Bragg Grating sensors is introduced. Torsion tests of the c...
Fatigue performance of PVA fibre reinforced cementitious composite overlays
Aleessa Alam, Burhan; Yaman, İsmail Özgür (2019-07-31)
Pavement maintenance and rehabilitation is as much important as the construction work itself. In this scope, applying the correct and efficient repair method is highly critical for economic and technical reasons. Depending on the damage level, many alternative repair methods exist. Using an overlay is one common method, where a new layer can be directly applied over or replace the top part of an existing pavement. This overlay can be made from asphalt or concrete as well. With the advances in the concrete t...
Citation Formats
A. Çataloğlu, “Torsion in reinforced concrete beam girder systems.,” Middle East Technical University, 1970.
METU IIS - Integrated Information Service open@metu.edu.tr