Effect of LiClO4 Salt on Dielectric Properties of Acrylonitrile-Methyl Methacrylate and Acrylonitrile-Isobutyl Methacrylate Copolymers

2014-01-01
VARGÜN, ELİF
ABACI, UFUK
SANKIR, MEHMET
Usanmaz, Ali
GÜNEY, HASAN YÜKSEL
Show full item record
Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
159
views
0
downloads
Poly(acrylonitrile-co-isobutyl methacrylate), PAN-co-PIBMA, and poly(acrylonitrile-co-methyl methacrylate), PAN-co-MMA copolymers are synthesized by emulsion polymerization. The structural characterization is done by FTIR and H-1-NMR spectroscopy and thermal analyses are performed by thermogravimetric analysis (TGA). After various amounts of LiClO4 salt loading into copolymer films, the dielectric properties of these films at different temperatures and frequencies are determined. The effects of different methacrylate groups and salt content on the dielectric properties of copolymers are investigated. It is found that the dielectric constant increases systematically with increasing MMA and IBMA content in the copolymer. The samples with higher salt content show higher ac-conductivities.
Emulsion polymerization, Ac-conductivity, Dielectric properties, Acrylonitrile
https://hdl.handle.net/11511/51657
JOURNAL OF MACROMOLECULAR SCIENCE PART A-PURE AND APPLIED CHEMISTRY
Graduate School of Natural and Applied Sciences, Article

Suggestions

Preparation and characterization of acrylonitrile-ethyl methacrylate copolymers and the effect of LiClO4 salt on electrical properties of copolymer films
VARGÜN, ELİF; SANKIR, MEHMET; Usanmaz, Ali; Kanbur, Yasin; ABACI, UFUK; GÜNEY, HASAN YÜKSEL (2012-04-05)
Copolymers of poly(acrylonitrile-co-ethyl methacrylate), P(AN-EMA), with three different EMA content and parent homopolymers were synthesized by emulsion polymerization. The chemical composition of copolymers were identified by FTIR, H-1-NMR and C-13-NMR spectroscopy. The thermal properties of copolymers were modified by changing the EMA content in copolymer compositions. Various amounts of LiClO4 salt loaded (PAN-co-PEMA) copolymer films were prepared by solution casting. The dielectric properties of these...
Effect of W incorporation on the product distribution in steam reforming of bio-oil derived acetic acid over Ni based Zr-SBA-15 catalyst
Cakiryilmaz, Nurbanu; ARBAĞ, HÜSEYİN; OKTAR, NURAY; DOĞU, GÜLŞEN; Doğu, Timur (2018-02-15)
Zirconia incorporated SBA-15 type mesoporous material was synthesized following a one pot hydrothermal route, characterized and used as the catalyst support in the synthesis of Ni and bi-metallic Ni W based catalysts. Performances of these catalysts were tested in steam reforming of AcOH. Catalytic activity tests proved that the performances of SBA-15 and Zr-SBA-15 supported Ni based catalysts were highly stable and they also showed very high activity in steam reforming of acetic acid, giving complete conve...
Effect of sodium carbonate on carbothermic formation of hexagonal boron nitride
Akyıldız, Uğur; Sevinç, Naci; Department of Metallurgical and Materials Engineering (2010)
Effect of Na2CO3 on formation of hexagonal boron nitride (h-BN) by carbothermic method has been studied by subjecting B2O3-C and Na2CO3-added B2O3-C mixtures to N2 (g) atmosphere. Na2CO3 amount in the mixtures was changed in the range of 0-40 wt. %. Time and temperature were used as experimental variables. Reaction products were analyzed by XRD and scanning electron microscope. Na2CO3 was found to increase both the amount and the particle size of h-BN similar to CaCO3 [1]. Na2CO3 was found to be less effect...
Effect of different polysaccharides on swelling of composite whey protein hydrogels: A low field (LF) NMR relaxometry study
Özel, Barış; KILERCIOGLU, Mete; GRUNIN, Leonid; Öztop, Halil Mecit (2017-06-01)
Hydrogels are usually prepared from hydrophilic polymers and when different types of polymers are blended or emulsified with an oil phase the resulting gel is usually known as a composite gel. The objective of this study was to analyze the water uptake characteristics of whey protein-polysaccharide containing composite hydrogels. Composite and composite emulsion gels were formulated in this study using whey protein, xanthan (XN), pectin (PC), alginate (AL), and sunflower oil. Water absorption of hydrogels w...
Effect of impact modifier on the properties of poly (ethylene terephthalate)-organoclay nanocomposites
Yılmazer, Ülkü; Alyamac, Elif (2006-11-30)
The effects of component concentrations and addition order of the components, on the final properties of ternary nanocomposites composed of amorphous poly (ethylene terephthalate) matrix, organically modified clay, and an ethylene / methyl acrylate / glycidyl methacrylate (E-MAGMA) terpolymer were studied. All formulations were prepared by melt compounding of the components with a two-step mixing procedure in a corotating twin-screw extruder. Considering the X-Ray Diffraction, SEM, impact and strain at brea...
Citation Formats
E. VARGÜN, U. ABACI, M. SANKIR, A. Usanmaz, and H. Y. GÜNEY, “Effect of LiClO4 Salt on Dielectric Properties of Acrylonitrile-Methyl Methacrylate and Acrylonitrile-Isobutyl Methacrylate Copolymers,” JOURNAL OF MACROMOLECULAR SCIENCE PART A-PURE AND APPLIED CHEMISTRY, pp. 156–164, 2014, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/51657.
METU IIS - Integrated Information Service open@metu.edu.tr