Determination of sorption isotherms of macaroni

Download
015487.pdf
1991
Dinçer, Tuna Derya
Show full item record
66
views
0
downloads
https://hdl.handle.net/11511/5204
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Determination of hydrate formation conditions of drilling fluids
Kupeyeva, Aliya; Parlaktuna, Mahmut; Department of Petroleum and Natural Gas Engineering (2007)
The objective of this study is to determine hydrate formation conditions of a multicomponent polymer based drilling fluid. During the study, experimental work is carried out by using a system that contains a high-pressure hydrate formation cell and pressure-temperature data is recorded in each experiment. Different concentrations of four components of drilling fluid, namely potassium chloride (KCl), partially hydrolyzed polyacrylicamide (PHPA), xanthan gum (XCD) and polyalkylene glycol (poly.glycol) were us...
Determination of Internal Stress of Ni Electroplated Samples in Sulphamate Solutions
Aykac, B.; Erdogan, M.; Karakaya, İshak (2017-06-01)
Internal stress is a common problem affecting the functionality of the electroplated materials. The parameters of electrodeposition and additive materials that are soluble in the bath change the characteristics of the plating and affect the internal stress of the coatings. The influence of the electrodeposition parameters on the internal stress of Ni deposits from the nickel sulphamate baths were studied by the help of fractional factorial design. The parameters included temperature, pH, current density and...
Determination of the semi-leptonic branching fraction of charm hadrons produced in neutrino charged-current interactions
Kayis-Topaksu, A; et. al. (Elsevier BV, 2002-11-01)
During the years 1994-1997, the emulsion target of the CHORUS detector was exposed to the CERN-SPS Wide Band Neutrino Beam. The improvements of the past few years in the automatic emulsion scanning systems allowed a sample of events located in emulsion to be used for studies of charm production. Based on a sample of 56 172nu(mu) charged-current interactions analysed so far, we find a value of B-mu = 0.093+/-0.009(stat.) +/-0.009(syst.) for the semi-leptonic branching fraction of charm hadrons. The result fo...
Determination of flow curves of the metastable austenite
Şimşir, Caner; Davut, Kemal; Gür, Cemil Hakan (null; 2014-09-01)
Thermo-mechanical properties of metastable austenite are significant parameters for the prediction of distortion and residual stresses by heat treatment simulations. Unfortunately, acquisition of thermo-mechanical properties of a metastable phase in the complete process temperature range requires special techniques and instrumentation. in this study, flow curves of metastable austenite of SAE 52100 (EN ıoOCr6) steel were characterized by special compression tests conducted on a deformation dilatometer in 30...
Determination of wall-shear stress in a rectangular open channel
Sari, Aydan; Department of Civil Engineering (1987)
Citation Formats
T. D. Dinçer, “Determination of sorption isotherms of macaroni,” Middle East Technical University, 1991.
METU IIS - Integrated Information Service open@metu.edu.tr