Optimum selection of polarising signal for a polarised MHO relay using induction cup relay-comparator.

1973
Ünan, Şerif

Suggestions

OPTIMUM DESIGN OF DISCRETE TRANSMIT PHASE ONLY BEAMFORMER
Demir, Özlem Tuğfe; Tuncer, Temel Engin (2013-09-13)
Transmit beamformer design usually results suboptimum bearnformers in multicast scenario. In this paper, discrete phase only beamformer design is considered. The design problem is cast in such a form that the solution is always feasible and optimum beamformer can be found using the branch and cut algorithm. Beamformer phase terms and their interrelations are expressed with a set of cosine vectors which lead to linear set of constraint equations that can be solved with mixed integer linear prograrmning. It i...
Optimum design of multipole synchronous generators.
Akpınar, Eyüp; Department of Electrical Engineering (1984)
Optimum characteristic properties of isolators with bilinear force-displacement hysteresis for seismic protection of bridges built on various site soils
Dicleli, Murat (Elsevier BV, 2011-07-01)
In this study, closed form equations as functions of the isolator, bridge and ground motion properties are formulated to calculate the optimum characteristic strength, Q(d) and post-elastic stiffness, k(d), of the isolator to minimize the maximum isolator displacement (MID) and force (MIF) for seismic isolated bridges (SIBS). For this purpose, first, sensitivity analyses are conducted to identify the bridge, isolator and ground motion parameters that affect the optimum values of Q(d) and k(d). Next, for the...
Optimum short-range coordination of hydrothermal power generation by dynamic programming.
Arikan, Yıldız; Department of Electrical Engineering (1968)
Optimum design of water distribution networks by equivalent pipe lengths method.
Inozu, Demir; Department of Civil Engineering (1977)
Citation Formats
Ş. Ünan, “Optimum selection of polarising signal for a polarised MHO relay using induction cup relay-comparator.,” Middle East Technical University, 1973.