NATURAL VIBRATION CHARACTERISTICS OF ROTATING, COMPOSITE MULTI-LAYER BEAMS AND BLADES

1994-07-21
Tekinalp, Ozan
YAVUZ, A

Suggestions

Forced Vibration Testing of Reinforced Concrete Buildings
Çelik, Ozan Cem; Sucuoğlu, Haluk; Akyüz, Uğurhan (2003-05-26)
Forced Vibration Testing and Finite Element Modeling of a Nine-Story Reinforced Concrete Flat Plate-Wall Building
Çelik, Ozan Cem; Sucuoğlu, Haluk; Akyüz, Uğurhan (SAGE Publications, 2015-05-01)
Tunnel form buildings, owing to their higher construction speed and quality, lower cost, and superior earthquake resistance over that of conventional reinforced concrete buildings, have been widely used for mass housing, urban renewal, and post-earthquake reconstruction projects all over the world as well as in Turkey. However, there have been few dynamic tests performed on existing buildings with this structural system. This study investigates the dynamic structural properties of a typical nine-story reinf...
Nonlinear vibration of mistuned bladed disk assemblies
Orbay, Günay; Özgüven, Hasan Nevzat; Department of Mechanical Engineering (2008)
High cycle fatigue (HCF) failure has been studied extensively over the last two decades. Its impact on jet engines is severe enough that may result in engine losses and even life losses. The main requirement for fatigue life predictions is the stress caused by mechanical vibrations. One of the factors which have major impact on the vibratory stresses of bladed disk assemblies is a phenomenon called “mistuning” which is defined as the vibration localization caused by the loss of cyclic periodicity which is a...
Nonlinear vibration analysis of bladed disks with dry friction dampers
Ciğeroğlu, Ender; Özgüven, Hasan Nevzat (2006-08-22)
in this work, a new model is proposed for the vibration analysis of turbine blades with dry friction dampers. The aim of the study is to develop a multiblade model that is accurate and yet easy to be analyzed so that it can be used efficiently in the design of friction dampers. The suggested nonlinear model for a bladed disk assembly includes all the blades with blade to blade and/or blade to cover plate dry friction dampers. An important feature of the model is that both macro-slip and micro-slip models ar...
Active vibration control of beams and cylindrical structures using piezoelectric patches
Gençoğlu, Caner; Özgüven, Hasan Nevzat; Department of Mechanical Engineering (2014)
Airborne structures are required to be lightweight in today's designs. However this lowers the overall stiffness of the structure and causes low frequency vibration problems for which passive vibration control techniques are inadequate. Active vibration control using piezoelectric patches is a promising technology to solve vibration problems of aerospace structures. Many studies were done on beam and plate geometries, however studies on cylinder geometry which is used extensively as engineering structure, i...
Citation Formats
O. Tekinalp and A. YAVUZ, “NATURAL VIBRATION CHARACTERISTICS OF ROTATING, COMPOSITE MULTI-LAYER BEAMS AND BLADES,” 1994, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/54032.