APPLICATION OF A FUZZY LOGIC CONTROLLER FOR SPEED CONTROL ON A SMALL-SCALE TURBOJET ENGINE

Date

2014-06-20

Author

Usenmez, Serdar
Ekinci, Sinan
Uzol, Oğuz
Yavrucuk, İlkay

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

264
views

0
downloads

Having a small-scale turbojet engine operate at a desired speed with minimum steady state error, while maintaining good transient response is crucial in many applications, such as UAVs, and requires precise control of the fuel flow.

URI

https://hdl.handle.net/11511/54205

Collections

Department of Aerospace Engineering, Conference / Seminar

Suggestions

OpenMETU
Core

Validation of MISES 2 D Boundary Layer Code for High Pressure Turbine Aerodynamic Design ANDREW, PHILIP; Kahveci, Harika Senem (2007-01-01) Avoiding aerodynamic separation and excessive shock losses in gas turbine turbomachinery components can reduce fuel usage, and thus reduce operating cost. In order to achieve this, blading designs should be made robust to a wide range of operating conditions. Consequently, a design tool is needed which can be executed quickly for each of many operating conditions, and on each of several design sections which will accurately capture loss, turning and loading. This paper presents the validation of a boundary ...
Simulation of Dynamic Operation in Salient Pole Synchronous Machines Dordea, Toma; Munteanu, Radu; Campeanu, Aurel (2011-09-10) The design of today's high performance synchronous motors must take into account not only the steady state but also practically inevitable dynamic regimes. In such conditions an accurate predetermination of the parameters and constructive solution by modeling and simulation of the given dynamic operation, becomes a mandatory step. In this aim, in the present paper a novel mathematical model of the high power salient pole synchronous machine (SPSM) is elaborated. We proposed to consider especially the effect...
Validation of MISES Two-Dimensional Boundary Layer Code for High-Pressure Turbine Aerodynamic Design ANDREW, PHILIP; Kahveci, Harika Senem (ASME International, 2009-07-01) Avoiding aerodynamic separation and excessive shock losses in gas turbine turbomachinery components can reduce fuel usage and thus reduce operating cost. In order to achieve this, blading designs should be made robust to a wide range of operating conditions. Consequently, a design tool is needed-one that can be executed quickly for each of many operating conditions and on each of several design sections, which will accurately capture loss, turning, and loading. This paper presents the validation of a bounda...
Application of structural modification method to nonlinear vibration analysis of bladed disks Şayin, Burcu; Ciğeroğlu, Ender; Department of Mechanical Engineering (2013) High cycle fatigue failure of turbine blades is one of the most important problems in the design of gas turbine engines; hence, bladed-disk assemblies have been studied extensively for more than half a century. Damping design becomes an important issue in order to attenuate the blade vibration. For bladed-disk systems, friction damping concept is a common strategy to decrease vibration levels. There are different strategies in order to add friction damping to the system: blade-to-blade dampers such as shrou...
Analysis of 3-d grain burnback of solid propellant rocket motors and verification with rocket motor tests Püskülcü, Gökay; Ulaş, Abdullah; Department of Mechanical Engineering (2004) Solid propellant rocket motors are the most widely used propulsion systems for military applications that require high thrust to weight ratio for relatively short time intervals. Very wide range of magnitude and duration of the thrust can be obtained from solid propellant rocket motors by making some small changes at the design of the rocket motor. The most effective of these design criteria is the geometry of the solid propellant grain. So the most important step in designing the solid propellant rocket mo...

Citation Formats

S. Usenmez, S. Ekinci, O. Uzol, and İ. Yavrucuk, “APPLICATION OF A FUZZY LOGIC CONTROLLER FOR SPEED CONTROL ON A SMALL-SCALE TURBOJET ENGINE,” 2014, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/54205.