Mansuroglu, Dogan
Uzun Kaymak, İlker Ümit


Cyclic Testing of Reinforced Concrete Double Walls
ALDEMİR, ALPER; Binici, Barış; Canbay, Erdem (2017-03-01)
Reinforced concrete double walls are semi-precast structural elements constructed with factory-produced concrete shells on two exterior sides and cast-in-place concrete in the middle of the section. Their use has been limited in seismic zones due to the difficulty of connecting the adjacent double walls for monolithic action, and providing suitable seismic details in the presence of the lattice girder that is used to hold the concrete shells together. These limitations were overcome with the invention of di...
Scale Effect on CFRP Strengthening of Infilled Reinforced Concrete Frames
AKIN, EMRE; Canbay, Erdem; Binici, Barış; Ozcebe, Guney (2015-06-01)
The diagonal application of Carbon Fiber-Reinforced Polymer fabrics on hollow clay tile infill walls has been qualified as an efficient rehabilitation method for deficient reinforced concrete frames. However, majority of the experimental studies were conducted on 1/3-scaled RC frames and the effect of specimen scaling has not been questioned. In the current study, the results of an experimental campaign on 1/2-scaled RC frames are presented. Test specimens are grouped in two series having two different aspe...
Performance Evaluation of the Numerical Flux Jacobians in Flow Solution and Aerodynamic Design Optimization
Ezertas, Alper; Eyi, Sinan (2010-07-16)
A direct sparse matrix solver is utilized for the flow solution and the analytical sensitivity analysis. The effects of the accuracy of the numerical Jacobians on the accuracy of sensitivity analysis and on the performance of the Newton's method flow solver are analyzed in detail. The gradient based aerodynamic design optimization is employed to demonstrate those effects.
Fragility of a shear wall building with torsional irregularity
Akansel, Vesile Hatun; Gülkan, Polat; Department of Civil Engineering (2011)
Buildings with torsional irregularity represent the main focus of many current investigations. However, despite this volume of research, there is no established framework that describes adequately the seismic vulnerability of reinforced concrete shear wall systems. In this study, the three-dimensional behavior of a particular shear-wall structure under earthquake effects was examined with regard to the nonlinear behavior of the reinforced concrete assembly and the parameters that characterize the structure ...
Electronic properties of dye molecules adsorbed on anatase-titania surface for solar cell applications
Torun, Engin; Toffoli, Hande; Department of Physics (2009)
Wide band gap metal oxides have recently become one of the most investigated materials in surface science. Among these metal oxides especially TiO2 attracts great interest, because of its wide range applications, low cost, biocompatibility and ease of analysis by all experimental techniques. The usage of TiO2 as a component in solar cell technology is one of the most investigated applications of TiO2 . The wide band gap of TiO2 renders it ine cient for isolated use in solar cells. TiO2 surface are therefore...
Citation Formats
D. Mansuroglu and İ. Ü. Uzun Kaymak, “SURFACE MODIFICATION OF PET, PS, PE POLYMERS BY SINGLE RF PLASMA DISCHARGE,” 2017, Accessed: 00, 2020. [Online]. Available: