Design and investigation of a new type rotary vane air compresser and expander

Okutur, A. Selim


İki antenden oluşan radar sistemi için katlanma mekanizması geliştirilmesi
Yurt, Hünkar Kemal; Turgut, Ali Emre; Söylemez, Eres; Güler, Ismail; Fırtınaoğlu, Ekrem (2019-12-01)
Design and construction of an educatinal pump bench with operational controls
Güner, Berkay; Albayrak, Kahraman; Department of Mechanical Engineering (2004)
System characteristics of automated pumping systems may change due to wear, aging of piping, and accumulation of deposits in the system and/or due to configuration changes. Such changes might result in conflicts between the controlling algorithms and the actual system requirements for each particular case. The said mismatch between the actual physical system and the software controlling it, may result in inefficient operation of the pump which may even lead to total system failures (overpressurization of in...
Design and construction of an interferometric setup for dynamic measurement of clearances inside plain bearings
Jafari-Tabrizi, Atae; Dursunkaya, Zafer; Department of Mechanical Engineering (2017)
In this work with the help of fiber optic interferometry an experimental framework is designed and constructed to dynamically measure micron-level clearances inside main journal bearing of an engine crankshaft, and the trajectory of its shaft. For this purpose, the crankshaft is rotated at lower speeds than its operating speeds. An electric motor is used to rotate the crankshaft, and there are no pistons and connecting rods connected to the crankpins. Measured clearances from multiple points of the bearing ...
Design and construction of a double action attachment for production of powder metallurgy parts
Çınar, Halil; Sarıtaş, Süleyman; Department of Mechanical Engineering (1988)
Design and construction of a VHF doppler direction finding antenna for 150-170 Mhz.
Özden, Telek Emine; Department of Electrical Engineering (1982)
Citation Formats
A. S. Okutur, “Design and investigation of a new type rotary vane air compresser and expander,” Middle East Technical University, 1984.