Multi-color electrochromic polymers on reflective devices

2004-03-28
Reynolds, JR
Argun, AA
Çırpan, Ali
Aubert, PH

Suggestions

Multi-way, multilingual neural machine translation
Firat, Orhan; Cho, Kyunghyun; Sankaran, Baskaran; Yarman Vural, Fatoş Tunay; Bengio, Yoshua (2017-09-01)
We propose multi-way, multilingual neural machine translation. The proposed approach enables a single neural translation model to translate between multiple languages, with a number of parameters that grows only linearly with the number of languages. This is made possible by having a single attention mechanism that is shared across all language pairs. We train the proposed multi-way, multilingual model on ten language pairs from WMT'15 simultaneously and observe clear performance improvements over models tr...
Multi-frequency contactless electrical impedance imaging using realistic head models : single coil simulations
Gürsoy, Doğa; Ertan, Hulusi Bülent; Department of Electrical and Electronics Engineering (2007)
Contactless electrical impedance imaging technique is based upon the measurement of secondary electromagnetic fields caused by induced currents inside the body. In this study, a circular single-coil is used as a transmitter and a receiver. The purpose of this study is twofold: (1) to solve the induced current density distribution inside the realistic head model resulting from a sinusoidal excitation, (2) to calculate the impedance change of the same coil from the induced current distribution inside the head...
MULTI-GROUP MULTICAST BEAMFORMING FOR SIMULTANEOUS WIRELESS INFORMATION AND POWER TRANSFER
Demir, Özlem Tuğfe; Tuncer, Temel Engin (2015-09-04)
In this paper, simultaneous wireless information and power transfer (SWIPT) concept is introduced for multi group multicast beamforming. Each user has a single antenna and a power splitter which divides the radio frequency (RF) signal into two for both information decoding and energy harvesting. The aim is to minimize the total transmission power at the base station while satisfying both signal-to-interference-plus- noise-ratio (SINR) and harvested power constraints at each user. Unlike unicast and certain ...
Multi-Band Metamaterial Absorber: Design, Experiment and Physical Interpretation
Dincer, F.; KARAASLAN, MUHARREM; ÜNAL, EKİN ANIL; Akgol, O.; Sabah, C. (2014-03-01)
This paper presents the design, fabrication, characterization and experimental verification of a perfect Multi-Band Metamaterial (MTM) absorber (MA) based on a simple configuration of a rectangular resonator and strips operating in microwave frequency regime. The proposed multi-band MA provides perfect absorption with TE-incident angle independency. Maximum absorption rate is achieved as 99.43% at 5.19 GHz for simulation and 98.67% at 5.19 GHz for experiment, respectively. The measurement results of the fab...
Multichromic benzimidazole-containing polymers: Comparison of donor and acceptor unit effects
Nurioglu, Ayda Goycek; Akpinar, Hava; Sendur, Merve; Toppare, Levent Kamil (2012-09-01)
This study reports a comparative study on electrochromic properties of two donoracceptordonor (DAD)-type polymers namely poly(2-heptyl-4,7-di(thiophen-2-yl)-1H-benzo [d]imidazole) (BImTh) and poly(4,7-bis(2,3-dihydrothieno[3,4-b] [1,4]dioxin-5-yl)-2-heptyl-1H-benzo[d]imidazole) (BImEd). DAD-type monomers were polymerized electrochemically on indium tin oxide-coated glass slides to determine the optical properties of the polymers. Electrochemical rho-doping experiments were performed to determine the band ga...
Citation Formats
J. Reynolds, A. Argun, A. Çırpan, and P. Aubert, “Multi-color electrochromic polymers on reflective devices,” 2004, vol. 227, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/55585.