A new regime for operating capacitive micromachined ultrasonic transducers

Date

2003-09-01

Author

Bayram, Barış
Yaralioglu, GG
Khuri-Yakub, BT

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

151
views

0
downloads

We report on a new operation regime for capacitive micromachined ultrasonic transducers (cMUTs). Traditionally, cMUTs are operated at a bias voltage lower than the collapse voltage of their membranes. In the new proposed operation regime, first the cMUT is biased past the collapse voltage. Second, the bias voltage applied to the collapsed membrane is reduced without releasing the membrane. Third, the cMUT is excited with an ac signal at the bias point, keeping the total applied voltage between the collapse and snapback voltages. In this operation regime, the center of the membrane is always in contact with the substrate. Our finite element methods (FEM) calculations reveal that a cMUT operating in this new regime, between collapse and snapback voltages, possesses a coupling efficiency (k(T)(2)) higher than a cMUT operating in the conventional regime below its collapse voltage. This paper compares the simulation results of the coupling efficiencies of cMUTs operating in conventional and new operation regimes.

Subject Keywords

Acoustics and Ultrasonics, Instrumentation, Electrical and Electronic Engineering

URI

https://hdl.handle.net/11511/56549

Journal

IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL

DOI

https://doi.org/10.1109/tuffc.2003.1235329

Collections

Department of Electrical and Electronics Engineering, Article

Suggestions

OpenMETU
Core

Capacitive micromachined ultrasonic transducer design for high power transmission Bayram, Barış; Ergun, AS; Haeggstrom, E (Institute of Electrical and Electronics Engineers (IEEE), 2005-02-01) Capacitive micromachined ultrasonic transducers (cMUTs) were developed to meet the demands of the ultrasonic industry. To achieve maximum efficiency, the conventional operation of the cMUT requires a bias voltage close to the collapse voltage. Total acoustic output pressure is limited by the efficiency of the cMUT and the maximum-allowed pulse voltage on the membrane. In this paper, we propose the collapse-snapback operation of the cMUT: the membrane is collapsed onto the substrate in the collapsing cycle, ...
A Dual-Resonator Temperature Sensing Approach With Time Base Error Suppression Kaya, Onurcan; Azgın, Kıvanç (Institute of Electrical and Electronics Engineers (IEEE), 2020-01-15) In this study we present a novel dual-resonator temperature sensor which can be embedded in other MEMS sensors for improved thermal compensation and on-the-run calibration. For accurate temperature measurements, the proposed method mitigates time base errors in frequency counting, eliminates the need for a highly accurate reference clock and can cancel out the effects of aging of the time base without using a calibration process. The sensor structure is composed of a strain amplifying beam and two Double En...
Bilateral CMUT Cells and Arrays: Equivalent Circuits, Diffraction Constants, and Substrate Impedance KÖYMEN, Hayrettin; ATALAR, ABDULLAH; Tasdelen, A. Sinan (Institute of Electrical and Electronics Engineers (IEEE), 2017-02-01) We introduce the large-signal and small-signal equivalent circuit models for a capacitive micromachined ultrasonic transducer (CMUT) cell, which has radiating plates on both sides. We present the diffraction coefficient of baffled and unbaffled CMUT cells. We show that the substrate can be modeled as a very thick radiating plate on one side, which can be readily incorporated in the introduced model. In the limiting case, the reactance of this backing impedance is entirely compliant for substrate materials w...
Estimation of Articulatory Trajectories Based on Gaussian Mixture Model (GMM) With Audio-Visual Information Fusion and Dynamic Kalman Smoothing ÖZBEK, İbrahim Yücel; Hasegawa-Johnson, Mark; Demirekler, Mübeccel (Institute of Electrical and Electronics Engineers (IEEE), 2011-07-01) This paper presents a detailed framework for Gaussian mixture model (GMM)-based articulatory inversion equipped with special postprocessing smoothers, and with the capability to perform audio-visual information fusion. The effects of different acoustic features on the GMM inversion performance are investigated and it is shown that the integration of various types of acoustic (and visual) features improves the performance of the articulatory inversion process. Dynamic Kalman smoothers are proposed to adapt t...
An optical fiber radiation sensor for remote detection of radiological materials Klein, DM; Yukihara, EG; Bulur, Enver; Durham, JS; Akselrod, MS; McKeever, SWS (Institute of Electrical and Electronics Engineers (IEEE), 2005-08-01) This paper demonstrates the feasibility of a portable radiation sensor system that uses the pulsed optically stimulated luminescence technique to remotely interrogate an aluminum oxide (Al2O3:C) radiation sensor via an optical fiber. The objective is to develop a system for applications requiring simple and inexpensive sensors for widespread monitoring of ionizing radiation levels, which can be remotely interrogated at regular periods with little or no human intervention and are easy to install, operate, an...

Citation Formats

B. Bayram, G. Yaralioglu, and B. Khuri-Yakub, “A new regime for operating capacitive micromachined ultrasonic transducers,” IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL, pp. 1184–1190, 2003, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/56549.