Application of Geiger's method to western Turkish earthquakes

Download
1990
Merdan, Gültekin

Suggestions

Application of numerical model for tsunami propagation to the Turkish coasts from Fethiye to Datça
Durmuşoğlu, Özcan; Yalçıner, Ahmet Cevdet; Department of Civil Engineering (1998)
Application of photostress method on stress analysis of gear teeth
Böncü, Aysel; Bilir, Ömer Gündüz; Department of Mechanical Engineering (1994)
Application of structural modification method to nonlinear vibration analysis of bladed disks
Şayin, Burcu; Ciğeroğlu, Ender; Department of Mechanical Engineering (2013)
High cycle fatigue failure of turbine blades is one of the most important problems in the design of gas turbine engines; hence, bladed-disk assemblies have been studied extensively for more than half a century. Damping design becomes an important issue in order to attenuate the blade vibration. For bladed-disk systems, friction damping concept is a common strategy to decrease vibration levels. There are different strategies in order to add friction damping to the system: blade-to-blade dampers such as shrou...
Application of simulation technique to water resourse development of Berdan Basin.
Ergin, Cengiz; Department of Industrial Engineering (1973)
Application of ultrasonic burning rate measurement method on closed bombs
Mumcu, Berkan; Kurtuluş, Dilek Funda; Arkun, Uğur; Department of Aerospace Engineering (2013)
In this thesis study, detailed information about solid rocket motors and ultrasonic burning rate measurement method is given. An experimental setup is prepared for applying the ultrasonic burning rate measurement method. Before performing the burning tests, some pre-tests are performed for affirming the ultrasonic sensor and obtaining some experimental coefficients. Two different types of propellants, which do not include aluminum, are produced for the burning tests. The first type of the propellants has tw...
Citation Formats
G. Merdan, “Application of Geiger’s method to western Turkish earthquakes,” Middle East Technical University, 1990.