Application of line of balance technique for project planning and scheduling in construction industry.

1985
Hassan, Mohammed Jawad
Show full item record
102
views
0
downloads
https://hdl.handle.net/11511/5911
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Application of TGA-MS technique for oil shale characterization and kinetics
Kök, Mustafa Verşan; Varfolomeev, Mikhail A.; Nurgaliev, Danis K.; Kandasamy, Jayaraman (2022-03-01)
Thermal characteristics and model free kinetics of four different oil shale samples were studied using simultaneous thermogravimetry-mass spectrometer (TGA-MS) analysis performed at three different heating rates and under air atmosphere. All the reaction regions and corresponding peak temperatures, mass loss, and the residue of oil shale samples were determined. Meanwhile, the main volatile products, primary alcohols, and aromatic compounds as products of oil shale combustion, were determined on the basis o...
Application of spring analogy mesh deformation technique in airfoil design optimization
Yang, Yosheph; Özgen, Serkan; Department of Aerospace Engineering (2015)
In this thesis, an airfoil design optimization with Computational Fluid Dynamics (CFD) analysis combined with mesh deformation method is elaborated in detail. The mesh deformation technique is conducted based on spring analogy method. Several improvements and modifications are addressed during the implementation of this method. These enhancements are made so that good quality of the mesh can still be maintained and robustness of the solution can be achieved. The capability of mesh deformation is verified by...
Application of spatial h∞ control technique for active vibration control of a smart beam
Kircali, Omer Faruk; Yaman, Yavuz; Nalbantoǧlu, Volkan; Şahin, Melin; Karadal, Fatih Mutlu (2007-12-01)
Application of spatial H-infinity control technique for active vibration control of a smart beam
Kircali, Oemer Faruk; Yaman, Yavuz; Nalbantoglu, Volkan; Şahin, Melin; Karadal, Fatih Mutlu (2007-05-12)
This study presents the design and implementation of a spatial H-infinity controller for the active vibration control of a cantilevered smart beam. The smart beam consists of a passive aluminum beam (507x51x2mm) and eight symmetrically surface bonded SensorTech BM500 type PZT (Lead-Zirconate-Titanate) patches (25x20x0.5mm). PZT patches are used as actuators and a laser displacement sensor is used as sensor. The smart beam was analytically modelled by using the assumed-modes method. The model only included t...
Application of risk management process on wave propagation in aerospace medium
Konukcu, Selda; Tulunay, Yurdanur; Department of Aerospace Engineering (2006)
In this thesis, risk management methods are investigated in order to integrate risk management practices into the Turkish Aerospace industry. The research presents the sequence of risk management processes as identification of risk, analysis of risk, risk planning etc. Risk analysis methods named as Risk Ranking and Analytical Hierarchy Process (AHP) are investigated in order to improve reliability and safety of the systems or processes in the aerospace industry. The main aim of using risk ranking and AHP t...
Citation Formats
M. J. Hassan, “Application of line of balance technique for project planning and scheduling in construction industry.,” Middle East Technical University, 1985.
METU IIS - Integrated Information Service open@metu.edu.tr