EFFECT OF DIFFERENT HEAT TREATMENT METHODS ON THE POZZOLANİC ACTİVİTY OF PERLİTE POWDER/ FARKLI ISIL İŞLEM YÖNTEMLERİNİN PERLİTE TOZUNUN POZZOLANİK AKTİVİTESİ ÜZERİNE ETKİSİ

Date

2013-12-31

Author

Turanlı, Lutfullah
Sassanı, Alıreza

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

54
views

0
downloads

EFFECT OF DIFFERENT HEAT TREATMENT METHODS ON THE POZZOLANİC ACTİVİTY OF PERLİTE POWDER/ FARKLI ISIL İŞLEM YÖNTEMLERİNİN PERLİTE TOZUNUN POZZOLANİK AKTİVİTESİ ÜZERİNE ETKİSİ

URI

https://hdl.handle.net/11511/59892

Collections

Graduate School of Natural and Applied Sciences, Project and Design

Suggestions

OpenMETU
Core

Effect of initial powder morphology on thermal and mechanical properties of stand-alone plasma-sprayed 7 wt.% Y2O3-ZrO2 coatings Ercan, Batur; Trice, Rodney W.; Wang, Hsin; Porter, Wally (Elsevier BV, 2006-11-05) The effects of starting powder morphology on the thermal and mechanical properties of stand-alone plasma-sprayed 7 wt.% Y2O3-ZrO2 (YSZ) coatings were studied. Two powder morphologies were investigated: an agglomerated and sintered powder (referred to presently as "AS") and a powder manufactured using plasma spheroidization to create hollow spheres (referred to presently as "HS"). Coatings made from AS powders contained 0.21 wt.% SiO2 impurity, twice as much as observed in coatings made from HS powders. Prop...
Effect of high-temperature on the swellable organically-modified silica (SOMS) and its application to gas-phase hydrodechlorination of trichloroethylene Sohn, Hyuntae; Çelik, Gökhan; Gunduz, Seval; Majumdar, Sreshtha Sinha; Dean, Stacey L.; Edmiston, Paul L.; Ozkan, Umit S. (2017-01-01) Pd catalysts supported on swellable organically-modified silica (SOMS) and high-temperature treated swellable organically-modified silica (H-SOMS) were characterized and tested for gas-phase hydrodechlorination (HDC) of trichloroethylene (TCE) conditions. The high-temperature treatment on SOMS resulted in an increase in surface area and pore diameter as well as significant improvement of Pd dispersion on H-SOMS with smaller Pd particle sizes compared to the Pd/SOMS catalyst. Although the high-temperature tr...
Effect of heat treatment on microstructural and mechanical properties of molybdenum based PM ferrous alloys Davoudnezhad, Ramona; Ögel, Bilgehan; Durlu, Nuri; Department of Metallurgical and Materials Engineering (2016) In this study, the effect of different heat treatment processes on microstructural and mechanical properties of Distaloy-DH and Astaloy Mo (Fe-2Cu-1.5Mo) powders are investigated. Powder samples are sintered at 1120°C for 45 minutes in a sintering furnace under reducing atmosphere of: 10% H2 + 90% N2. After sintering, secondary heat treatments are performed on samples. Microstructural characterization of samples is done with optical and electron microscopy. Selective etching is utilized for determining the ...
Effect of process control agents on synthesizing nano-structured 2Mg-9Ni-Y catalyst by mechanical milling and its catalytic effect on desorption capacity of MgH2 Hosseini-Gourajoubi, Faranak; Pourabdoli, Mehdi; Üner, Deniz; Raygan, Shahram (2015-03-01) Synthesizing 2Mg-9Ni-Y catalyst was investigated by mechanical alloying of Mg, Ni, and Y elemental powder mixture and subsequent heat treatment. Accordingly, effects of milling time, process control agent (PCA) type (stearic acid and toluene), and heat treatment time on the powder microstructure, phase composition, and powder morphology were studied by X-ray diffraction (XRD), scanning electron microscopy (SEM), and laser particle size analyzer (LPSA). Results showed that particle size of the samples prepar...
Effect of boron compounds on fire protection properties of epoxy based intumescent coating ÜNLÜ, Şaban Murat; Tayfun, Umit; YILDIRIM, Bekir; DOĞAN, Mehmet (2017-01-01) The aim of this study was to investigate the effect of boron compounds on fire protection properties of intumescent coating based on ammonium polyphosphate (APP). Three kinds of boron compounds namely boric acid (BA), zinc borate (ZB) and melamine borate (MB) were used. Total amount of flame retardant additive was kept constant at 30 wt%, and boron compounds were used at three concentrations of 1, 3 and 5 wt%. Thermogravimetric analysis (TGA), Attenuated total reflectance-Fourier transform infrared spectros...

Citation Formats

L. Turanlı and A. Sassanı, “EFFECT OF DIFFERENT HEAT TREATMENT METHODS ON THE POZZOLANİC ACTİVİTY OF PERLİTE POWDER/ FARKLI ISIL İŞLEM YÖNTEMLERİNİN PERLİTE TOZUNUN POZZOLANİK AKTİVİTESİ ÜZERİNE ETKİSİ,” 2013. Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/59892.