Design and construction of a robotic manipulator with six revolute joints

Download

Date

1989

Author

Başçuhadar, İlhan

Metadata

Show full item record

Item Usage Stats

URI

https://hdl.handle.net/11511/6197

Collections

Suggestions

Design and construction of a two stage electrohydraulic servovalve with force feedback Kapucu, Sadettin; Bayseç, Sedat; Department of Mechanical Engineering (1990)
Design and construction of a planar spiral antenna in the 1-18 GHZ frequency range Oran, Ekrem; Altunkan, Hızal; Department of Electrical and Electronics Engineering (1991)
Design and modeling of a novel rectifier with ceramic hollow fiber membrane contactor for miniaturized absorption cooling devices Özkan, Onur; Güvenç Yazıcıoğlu, Almıla; Baker, Derek Keıth; Department of Mechanical Engineering (2015) Miniaturized and mobile absorption cooling devices may be used in many applications, but effective and small size heat and mass exchangers are required. Ceramic hollow fiber membranes are thermally stable so that they can be used for the rectification of ammonia in an absorption cooling device. In this study the simultaneous heat and mass transfer between the ammonia-water vapor and the reflux liquid is modeled in a rectifier and stripper with hydrophobic ceramic hollow fiber membranes. A similar model is u...
Design and construction of an eight degrees of freedom redundant manipulator. Atış, Ünsal; Bulut, M. Mete; Department of Electrical and Electronics Engineering (1993)
Design and construction of a pure high voltage capacitance divider. Taplamacıoğlu, M Cengiz; Department of Electrical Engineering (1986)

Citation Formats

İ. Başçuhadar, “Design and construction of a robotic manipulator with six revolute joints,” Middle East Technical University, 1989.