Correlations of the temperature and pressure dependencies of the elastic constants of zircon

2008-12-01
Ozkan, H.
The temperature dependencies of the single crystal elastic constants and the isotropic elastic moduli of zircon were reevaluated using the ultrasonic in-phase frequencies vs. temperature data and the thermal expansion coefficients. The bulk moduli of zircon at different temperatures were also calculated using the recently derived analytical expression by Garai and Laugier (J. Appl. Phys. 101, 023514 (2007)) utilizing the Anderson-Gruneisen parameter (8) obtained from the pressure dependencies of the single crystal elastic constants. The temperature derivatives of the bulk modulus of zircon evaluated from the temperature derivatives of the single crystal elastic constants agree well with the corresponding values calculated from the analytical expressions utilizing the pressure derivative of the bulk modulus (8). The results reveal good correlations between the ultrasonic measurements of the pressure and temperature derivatives of the single crystal elastic constants of zircon.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

Suggestions

Pressure-dependent Raman modes near the cubic-tetragonal transition in strontium titanate
KİRACI, ALİ; Yurtseven, Hasan Hamit (Wiley, 2018-03-01)
The pressure dependence of the Raman frequency shifts of various Raman modes is calculated at room temperature using the volume data from the literature for the cubic-tetragonal transition in SrTiO3. The isothermal mode Gruneisen parameters of those Raman modes are obtained, which decrease with increasing pressure for this molecular crystal. Calculated Raman frequencies are then used to predict the damping constant and the inverse relaxation time of those Raman modes as a function of pressure by means of th...
Activity-corn position relations in MuCr(2)O(4)-CoCr2O4 solid solutions and stabilities of MnCr2O4 and CoCr2O4 at 1300 degrees C
Koc, N; Timucin, M (Wiley, 2005-09-01)
Phase equilibria in the system MnO-CoO-Cr2O3 were investigated at 1300 degrees C under controlled oxygen partial pressures by using the gas equilibration technique. The CoO activities in various phase assemblages of the system were measured by determining the partial pressures of oxygen in the gas phase for coexistence with metallic cobalt. The activity data revealed that at 1300 degrees C, MnO-CoO and MnCr2O4-CoCr2O4 solid solutions exhibit mild positive departures from ideal behavior. The activities in th...
PHASE-RELATIONS IN THE SYSTEM CE2O3-CE2SI2O7 IN THE TEMPERATURE-RANGE 1150-DEGREES TO 1970-DEGREES-C IN REDUCING AND INERT ATMOSPHERES
TAS, AC; AKINC, M (Wiley, 1994-11-01)
The high-temperature phase relations in the system Ce2O3-Ce2Si2O7 have been studied in the temperature range 1150 degrees-1970 degrees C in inert and reducing atmospheres by conventional quenching and differential thermal analysis. Three eutectic reactions were found to occur at 1664 degrees C and 27 mol% SiO2 between Ce2O3 and Ce2SiO5, at 1870 degrees C and 54 mol% SiO2 between Ce2SiO5 and Ce-4.67(SiO4)(3)O, and at 1762 degrees C and 65 mol% SiO2 between Ce-4.67(SiO4)(3)O and Ce2Si2O7. Microstructural char...
Impact modified polyamide-6/organoclay nanocomposites: Processing and characterization
Isik, Isil; YILMAZER, ÜLKÜ; Bayram, Göknur (Wiley, 2008-02-01)
The effects of melt state compounding of ethylene-butyl acrylate-maleic anhydride (E-BA-MAH) terpolymer and/or three types of organoclays (Cloisitel(R) 15A, 25A, and 3013) on thermal and mechanical properties and morphology of polyamide-6 are investigated. E-BA-MAH formed spherical domains in the materials to which it is added, and increased the impact strength, whereas the organoclays decreased the impact strength. In general, the organoclays increased the tensile strength (except for Cloisite 15A), Young'...
Kinetic model for alpha-tricalcium phosphate hydrolysis
Durucan, Caner (Wiley, 2002-08-01)
A mechanistic model for the kinetics of hydrolysis of alpha-tricalcium phosphate (alpha-Ca-3(PO4)(2) or alpha-TCP) to hydroxyapatite (Ca10-x(HPO4)(x)(PO4)(6-x)(OH)(2-x) or HAp) has been developed. The model is based on experimental hydrolysis rate data obtained using isothermal calorimetry. Analysis of the kinetic data according to the general kinetics models in terms of the fractional degree of reaction and time suggests the hydrolysis to be controlled by different rate-limiting mechanisms as reaction proc...
Citation Formats
H. Ozkan, “Correlations of the temperature and pressure dependencies of the elastic constants of zircon,” JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, pp. 3091–3095, 2008, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/64255.