Editor's note to special issue

Date

2005-10-01

Author

Vesilind, PA

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

92
views

0
downloads

Subject Keywords

Engineering, Environmental

URI

https://hdl.handle.net/11511/64363

Journal

JOURNAL OF RESIDUALS SCIENCE & TECHNOLOGY

Collections

Department of Environmental Engineering, Article

Suggestions

OpenMETU
Core

Comparison of iscst3 and aermod air dispersion models: case study of cayirhan thermal power plant Dölek, Emre; Atımtay, Aysel; Department of Environmental Engineering (2007) In this study, emission inventory was prepared and pollutant dispersion studies were carried out for the area around Çayırhan Thermal Power Plant to determine the effects of the plant on the environment. Stack gas measurement results were used for the emissions from the power plant and emission factors were used for calculating the emissions from residential sources and coal stockpiles in the study region. Ground level concentrations of SO2, NOx and PM10 were estimated by using EPA approved dispersion model...
Municipal wastewater and sludge management in Turkey Sanin, Faika Dilek (2005-10-01)
Investigation of the spatial relationship of municipal solid waste generation in Turkey with socio-economic, demographic and climatic factors Keser, Saniye; Aksoy, Ayşegül; Department of Environmental Engineering (2010) This thesis investigates the significant factors affecting municipal solid waste (MSW) generation in Turkey. For this purpose, both spatial and non-spatial tech¬niques are utilized. Non-spatial technique is ordinary least squares (OLS) regression while spatial techniques employed are simultaneous spatial autoregression (SAR) and geographically weighted regression (GWR). The independent variables include socio-economic, demographic and climatic indicators. The results show that nearer provinces tend to have ...
Modeling the water quality in Ulubat Lake Yenilmez, Firdes; Aksoy, Ayşegül; Department of Environmental Engineering (2007) Lakes can be used for recreational purposes, agricultural irrigation, domestic water supply or industrial use. However, these functions of the lakes can be impaired due to excess nutrient loadings from industrial facilities, agricultural activities, and discharge of wastewaters from sewage systems. Uluabat Lake is one of the important lakes in Turkey faced with water quality problems due to excess nutrient loading from point and non-point sources. In this study, Water Quality Analysis Simulation Program (WA...
Assessment of the best available wastewater management techniques for a textile mill: cost and benefit analysis Doğan, Buğçe; Yetiş, Ülkü; Department of Environmental Engineering (2008) The Integrated Pollution Prevention and Control (IPPC) Directive from the European Union strives to achieve a high level of environmental protection by preventing or reducing the pollution emanating from industrial installations directly at the source. The Directive implies that the emission limit values should be set in accordance with each industry’s Best Available Techniques (BAT). In the present study, water recovery and wastewater treatability alternatives developed beforehand were evaluated towards th...

Citation Formats

P. Vesilind, “Editor’s note to special issue,” JOURNAL OF RESIDUALS SCIENCE & TECHNOLOGY, pp. 197–197, 2005, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/64363.