Automated design of printed circuit boards.

Erdem, M Tuncer


Automated logic design of single and multiple output nand networks.
Atli, Selami I; Department of Electrical Engineering (1972)
Automated network generation for the development of a project management system.
Akkuzu, Bahar; Department of Industrial Engineering ()
Automated calibration of water distribution networks
Apaydın, Öncü; Merzi, Nuri; Department of Civil Engineering (2013)
Water distribution network models are widely used for various purposes such as long-range planning, design, operation and water quality management. Before these models are used for a specific study, they should be calibrated by adjusting model parameters such as pipe roughness values and nodal demands so that models can yield compatible results with site observations (basically, pressure readings). Many methods have been developed to calibrate water distribution networks. In this study, Darwin Calibrator, a...
Automated Sizing of Truss Structures Using a Computationally Improved SOPT Algorithm
Hasançebi, Oğuzhan (2013-06-01)
The present study attempts to apply an efficient yet simple optimization (SOPT) algorithm to optimum design of truss structures under stress and displacement constraints. The computational efficiency of the technique is improved through avoiding unnecessary analyses during the course of optimization using the so-called upper bound strategy (UBS). The efficiency of the UBS integrated SOPT algorithm is evaluated through benchmark sizing optimization problems of truss structures and the numerical results are r...
Automated design analysis of anti-roll bars
Çalışkan, Kemal; Ünlüsoy, Yavuz Samim; Dağ, Serkan; Department of Mechanical Engineering (2003)
Citation Formats
M. T. Erdem, “Automated design of printed circuit boards.,” Middle East Technical University, 1980.