Mathematical model of effect of welding parameters on weld bead geometry of aluminum 5086 alloy

Download
093329.pdf
2000
Koç, Barış
Show full item record
46
views
0
downloads
https://hdl.handle.net/11511/6662
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Mathematical Modeling of Liquid Steel Flow in Continuous Casting Machine
Yavuz, Mehmet Metin (null; 2012-04-18)
Mathematical expression of the temperature profile and experimental determination of compression heating of ethylene glycol during high hydrostatic pressure processing
Buzrul, S.; Alpas, Hami; Largeteau, A.; Demazeau, G. (Informa UK Limited, 2007-03-01)
In this study, we aimed to describe the temperature profile in the pressure vessel and the compression heating during high hydrostatic pressure (HHP) processing. Regression coefficients (R-2), root mean square error (RMSE) values and residual plots suggested that fourth-order polynomial function produced reasonable fits to define the temperature profile for all the pressures studied (300-600 MPa). If all the coefficients of this empirical model are determined, initial and final temperatures, a value close t...
Mathematical modelling of salt diffusion in Turkish feta cheese and determination of diffusion coefficient
Turhan, Mahir; Gencer, Gönül; Department of Food Engineering (1987)
Mathematical modelling of catalyst section of fluid catalytic cracking unit of İzmir refinery.
Timuçin, Süleyman; Department of Chemical Engineering ()
Mathematical modeling of survival and weight loss of Baker's yeast during drying
Alpas, Hami; BOZOGLU, F; KATNAS, S (1996-10-01)
Drying and death rates of Baker's yeast were studied in a computer-controlled laboratory scale tunnel drier with varying air velocity between 2.0-3.0 ms-1 and temperatures within the range of 40-60 degrees C. Two falling rate periods were observed during the drying process. A single first-order expression described the death rate of the microorganisms during both drying phases. Arrhenius-type expressions described the effects of the temperature on the first falling rate period drying and death rate constant...
Citation Formats
B. Koç, “Mathematical model of effect of welding parameters on weld bead geometry of aluminum 5086 alloy,” Middle East Technical University, 2000.
METU IIS - Integrated Information Service open@metu.edu.tr