THE MODE-III CRACK PROBLEM IN BONDED MATERIALS WITH A NONHOMOGENEOUS INTERFACIAL ZONE

Date

1991-06-01

Author

ERDOGAN, F
KAYA, AC
JOSEPH, PF

Metadata

Show full item record

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Item Usage Stats

148
views

0
downloads

In this paper the mode III crack problem for two bonded homogeneous half planes is considered. The interfacial zone is modeled by a nonhomogeneous strip in such a way that the shear modulus is a continuous function throughout the composite medium and has discontinuous derivatives along the boundaries of the interfacial zone. The problem is formulated for cracks perpendicular to the nominal interface and is solved for various crack locations in and around the interfacial region. The asymptotic stress field near the tip of a crack terminating at an interface is examined and it is shown that, unlike the corresponding stress field in piecewise homogeneous materials, in this case the stresses have the standard square root singularity and their variation is identical to that of a crack in a homogeneous medium. With application to the subcritical crack growth process in mind, the results given include mostly the stress intensity factors for some typical crack geometries and various material combinations.

Subject Keywords

Mechanical Engineering, Mechanics of Materials, Condensed Matter Physics

URI

https://hdl.handle.net/11511/67156

Journal

JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME

DOI

https://doi.org/10.1115/1.2897202

Collections

Department of Mechanical Engineering, Article

Suggestions

OpenMETU
Core

THE CRACK PROBLEM IN BONDED NONHOMOGENEOUS MATERIALS ERDOGAN, F; KAYA, AC; JOSEPH, PF (ASME International, 1991-06-01) In this paper the plane elasticity problem for two bonded half-planes containing a crack perpendicular to the interface is considered. The primary objective of the paper is to study the effect of very steep variations in the material properties near the diffusion plane on the singular behavior of the stresses and stress intensity factors. The two materials are, thus, assumed to have the shear moduli mu(0) and mu(0)exp(beta-x), x = 0 being the diffusion plane. Of particular interest is the examination of ...
A variational multiscale constitutive model for nanocrystalline materials Gürses, Ercan (Elsevier BV, 2011-03-01) This paper presents a variational multi-scale constitutive model in the finite deformation regime capable of capturing the mechanical behavior of nanocrystalline (nc) fcc metals. The nc-material is modeled as a two-phase material consisting of a grain interior phase and a grain boundary effected zone (GBAZ). A rate-independent isotropic porous plasticity model is employed to describe the GBAZ, whereas a crystal-plasticity model which accounts for the transition from partial dislocation to full dislocation m...
THE EFFECT OF A 3RD COMPONENT IMPURITY-C ON THE HEAT-CAPACITY OF A3B-TYPE ORDERED ALLOYS Mehrabov, Amdulla; MATYSINA, ZA (Wiley, 1989-12-01) For the first time theoretical (in terms of the classical theory of ordering) and experimental (with the adiabatic calorimeter method) investigations are made of the effect of a third component impurity C on the heat capacity of A3B‐type ordered alloys with FCC structure. The effect of the impurities Mn, Cr, Mo, or W on the heat capacity of Ni3Fe alloys is analysed as an example. The comparison of the theoretical results with the experimental data shows good qualitative agreement.
A micro-macro approach to rubber-like materials. Part III: The micro-sphere model of anisotropic Mullins-type damage Göktepe, Serdar (Elsevier BV, 2005-10-01) A micromechanically based non-affine network model for finite rubber elasticity and viscoelasticity was discussed in Parts I and II [Miehe, C., Goktepe, S., Lulei, F., 2004. A micro-macro approach to rubber-like materials. Part I: The non-affine micro-sphere model of rubber elasticity. J. Mech. Phys. Solids 52, 2617-2660; Miehe, C., Goktepe, S., 2005. A micro-macro approach to rubber-like materials. Part II: Viscoelasticity model for polymer networks. J. Mech. Phys. Solids, published on-line, doi:10.1016/j....
The DRBEM solution of incompressible MHD flow equations Bozkaya, Nuray; Tezer, Münevver (Wiley, 2011-12-10) This paper presents a dual reciprocity boundary element method (DRBEM) formulation coupled with an implicit backward difference time integration scheme for the solution of the incompressible magnetohydrodynamic (MHD) flow equations. The governing equations are the coupled system of Navier-Stokes equations and Maxwell's equations of electromagnetics through Ohm's law. We are concerned with a stream function-vorticity-magnetic induction-current density formulation of the full MHD equations in 2D. The stream f...

Citation Formats

F. ERDOGAN, A. KAYA, and P. JOSEPH, “THE MODE-III CRACK PROBLEM IN BONDED MATERIALS WITH A NONHOMOGENEOUS INTERFACIAL ZONE,” JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME, pp. 419–427, 1991, Accessed: 00, 2020. [Online]. Available: https://hdl.handle.net/11511/67156.