Scenario Development: A Model-Driven Engineering Perspective

Oğuztüzün, Mehmet Halit S.


Scenario Building as Part of the Design Process
Hasdoğan, Gülay Fatma (University of Art and Design UIAH, 1997-06-01)
Scenario management practices in HLA based distributed simulation
Topçu, Okan; Oğuztüzün, Mehmet Halit S. (2010-04-01)
Training in a distributed simulation generally involves carefully designed and constructed simulation scenarios to fulfill the training aims. The simulation scenarios (i.e. federation scenario) play an important role in the federation design and development as specified in Federation Development and Execution Process. The simulation scenarios are used in every step in distributed simulation arena from the beginning (analysis and design) of a distributed simulation development to the execution. Such an exten...
Uncertainty Analysis of Heat Transfer Predictions Using Statistically Modeled Data From a Cooled 1-1/2 Stage High-Pressure Transonic Turbine
Kahveci, Harika Senem (ASME International, 2014-06-01)
This paper compares predictions from a 3D Reynolds-averaged Navier-Stokes code and a statistical representation of measurements from a cooled 1-1/2 stage high-pressure transonic turbine to quantify predictive process sensitivity. A multivariable regression technique was applied to both the inlet temperature measurements obtained at the inlet rake, the wall temperature, and heat transfer measurements obtained via heat-flux gauges on the blade airfoil surfaces. By using the statistically modeled temperature p...
Pseudo-Dynamic Testing, Performance Assessment, and Modeling of Deficient Reinforced Concrete Frames
Sucuoğlu, Haluk; Binici, Barış (2014-09-01)
A pair of half-scale, three-story, three-bay concrete bare frames were tested by the pseudo-dynamic (PsD) testing procedure. Both frames represent common deficiencies. of non-seismic construction. Continuous column reinforcement in one specimen and insufficient lap splices at the bottom ends of columns in the other specimen were the only significant differences. Measured seismic performances of both frames were assessed by using the rotation and strain-based acceptance criteria of two different seismic code...
Simulation applications in project evaluation.
Gedik, Hasan; Göktan, Erkut; Department of Business Administration (1995)
Citation Formats
U. DURAK, O. TOPÇU, R. SIEGFRIED, and M. H. S. Oğuztüzün, “Scenario Development: A Model-Driven Engineering Perspective,” 2014, Accessed: 00, 2020. [Online]. Available: