Design and construction of a torque measuring dunamometer for slab milling study of cutting forces, velocity and power during milling.

Date

1971

Author

Gülfidan, Şükrü

Metadata

Show full item record

Item Usage Stats

153
views

0
downloads

URI

https://hdl.handle.net/11511/6970

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

design and construction of a rotary tipe, bending moment fatigue tester for tests at elevated temperatures and investigation of fatigue properties on plain and nothed specimens. Borçbakan, Cevat; Department of Mechanical Engineering (1965)
Design and construction of a shear force testing apparatus for bulk materials. Özalp, Y. Vasfi; Department of Mechanical Engineering (1984)
Design and construction of an interferometric setup for dynamic measurement of clearances inside plain bearings Jafari-Tabrizi, Atae; Dursunkaya, Zafer; Department of Mechanical Engineering (2017) In this work with the help of fiber optic interferometry an experimental framework is designed and constructed to dynamically measure micron-level clearances inside main journal bearing of an engine crankshaft, and the trajectory of its shaft. For this purpose, the crankshaft is rotated at lower speeds than its operating speeds. An electric motor is used to rotate the crankshaft, and there are no pistons and connecting rods connected to the crankpins. Measured clearances from multiple points of the bearing ...
Design and construction of a six dimensional strain gage dynamometer for the measurement of the forces acting on a tillage implement. Obakan, Ahmet KıLıç; Department of Mechanical Engineering (1969)
Design and construction of an antenna matching unit for use in 30-76 Mhz band. Akçayöz, Fuat; Department of Electrical Engineering (1979)

Citation Formats

Ş. Gülfidan, “Design and construction of a torque measuring dunamometer for slab milling study of cutting forces, velocity and power during milling.,” Middle East Technical University, 1971.