Development of a computer program for the numerical solution of hydraulic bulging of a flat isotropic diaphragm.

1972
Edis, Mehmet Erkan

Suggestions

Development of a finite element computer code for the solution of some fluid mechanics and heat transfer problems.
Mahdi, Mofid; Aksel, M. Haluk; Department of Mechanical Engineering (1988)
Development of A Computer Program for The Numerical Investigation of Heat Transfer in A Gasketed Plate Heat Exchanger
Sert, İsmail Ozan; Sezer Uzol, Nilay; Güvenç Yazıcıoğlu, Almıla; Kakaç, Sadık (null; 2010-07-14)
In this study, a computer program is developed to calculate characteristics of a Chevron type gasketed plate heat exchanger (CTGPHEX) such as: the number of plates, the effective surface area and total pressure drops. The main reason to prefer the use of CTGPHEXs to other various types of heat exchangers is that the heat transfer efficiency is much higher in comparison. Working conditions such as the flow rates and inlet and outlet temperature of both flow sides and plate design parameters are used as an in...
Development of a computer program for ultimate strength of rectangular steel box girders.
Uykur, A. Berkhan; Department of Civil Engineering (1985)
Development of a computer program for thermodynamic calculation of binary phase diagrams
Numanoğlu, İlyas; Karakaya, İshak; Department of Metallurgical and Materials Engineering (1999)
Development of a computer program for the analysis of fatigue crack growth
Dalgıç, Ali Murtaza; Bilir, Ömer Gündüz; Kadıoğlu, Suat; Department of Mechanical Engineering (2002)
In this study, a computer program is developed for fatigue crack propagation analysis of metal alloys and random fiber composites. The developed program takes the fatigue crack propagation experiment data in the form of crack length vs. number of cycles from the user. The user also, selects the crack geometry and defines loading conditions of the test specimen. Developed program analyze the experimental data and evaluates crack growth rate and stress intensity range. For the calculated or ready crack growth...
Citation Formats
M. E. Edis, “Development of a computer program for the numerical solution of hydraulic bulging of a flat isotropic diaphragm.,” Middle East Technical University, 1972.