Analysis of temperature distribution in pistons and investigation of waer conditions of locally manufactured D.E piston rings.

Date

1972

Author

Yurtseven, Ahmet

Metadata

Show full item record

Item Usage Stats

129
views

0
downloads

URI

https://hdl.handle.net/11511/7003

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Analysis of heat transfer conditions in intake and exhaust valves of internal combustion engines. Önen, Ibrahim; Department of Mechanical Engineering (1973)
Analysis of mechanical behavior of high performance cement based composite slabs under impact loading Satıoğlu, Azize Ceren; Gülkan, Polat; Department of Civil Engineering (2009) Studies on the behavior of steel fiber reinforced concrete (SFRC) and slurry infiltrated fibrous concrete (SIFCON) to impact loading have started in recent years. Using these relatively new materials, higher values of tensile and compressive strength can be obtained with greater fracture toughness and energy absorption capacity, and therefore they carry a considerable importance in the design of protective structures. In this thesis, computational analyses concerning impact loading effect on concrete, steel...
Analysis of earthquake induced hydrodynamic effects in cylindrical container tanks Utkutuğ, Deniz; Yılmaz, Çetin; Polat, Uğur; Department of Civil Engineering (2001)
ANALYSIS AND DESIGN OF PRECAST BEAM-TO-COLUMN CONNECTIONS UNDER CYCLIC LOADING Mahamid, Mustafa; Baran, Eray; Torra-bilal, Ines; Bilal, Kamel (null; 2020-09-17)
Analysis of crack initiation and propagation in solid rocket motor nozzle throats Nigar, Barış; Özerinç, Sezer; Department of Mechanical Engineering (2019) Graphite is a widely used material in high temperature structural applications due to its high melting point and its mechanical strength and integrity at elevated temperatures. However, rocket nozzles made of graphite are subjected to very high temperatures and pressures that cause cracking and eventual failure. This thesis investigates the reasons of failure and explores design alternatives to overcome this problem. The experimental part of the thesis includes compression tests, tensile tests and fracture ...

Citation Formats

A. Yurtseven, “Analysis of temperature distribution in pistons and investigation of waer conditions of locally manufactured D.E piston rings.,” Middle East Technical University, 1972.