Cam yüzeyi desenlemesi için bir solüsyon ve uygulanması

2016
Sökmen, İlkay
Ünal, Mustafa
Turan, Raşit
Show full item record
207
views
0
downloads
https://hdl.handle.net/11511/70146
Department of Physics, Patent / Utility Model

Suggestions

Application of semi conductor films over glass/ceramic surfaces and their low temperature photocatalytic activity
Ersöz, Tuğçe İrfan; Karakaş, Gürkan; Department of Chemical Engineering (2009)
Semiconductor metal oxides can be induced by light with proper wavelength resulting in oxidation and reduction reactions for the transformation of water and oxygen molecules into active radicals. With this method, it is possible to obtain self-cleaning surfaces and products having antimicrobial properties. The aim of this study is to develop semiconductor metal oxide thin films for multifunctional glass products and the characterization of photocatalytic self cleaning and antimicrobial properties. As semico...
Physical and thermal properties of pine-needle lightweight loam
Aslan Pedergnana, Ece; Elias Özkan, Soofia Tahira; Department of Building Science in Architecture (2015)
Lightweight loam (LWL) is an ancient earth-based insulation material. Different types of LWL have been developed according to the usage and the availability of materials. However, the most used is straw and LWL is better known as straw-clay or slip-straw. In Turkey, straw is a valuable material used as an animal fodder. On the other hand, pine-needles are available in large quantities in Turkey. Production of mud-bricks and traditional mud roof insulation with pine-needles has proven its compatibility with ...
Processing and characterization of glass flake reinforced thermoplastic polymer matrix bio-inspried bulk lamellar composites /
Güneş, Aylin; Dericioğlu, Arcan Fehmi; Department of Metallurgical and Materials Engineering (2014)
The aim of this study was to develop processing pathways to fabricate glass flake reinforced bio-inspired composites with microstructural architecture similar to that of nacre using two processing routes based on hot-pressing and magnetic field assistance. Glass flakes with different aspect ratios were used as inorganic reinforcement in two different thermoplastic matrices, polystyrene (PS) and acrylonitrile butadiene styrene (ABS). Correlation between inorganic content, microstructural architecture and mec...
Preparation and characterizatton of fiber reinforced poly(ethylene terephtlate)
Altan, Cansu; Bayram, Göknur; Department of Chemical Engineering (2004)
Glass fiber reinforced poly(ethylene terephthalate), GF/PET has excellent potential for future structural applications of composite materials. PET as a semi-crystalline thermoplastic polyester has high wear resistance, low coefficient of friction, high flexural modulus and superior dimensional stability make it a versatile material for designing mechanical and electromechanical parts. Glass fibers are currently used as strength giving material in structural composites because of their high strength and high...
Design of glass structures: effects of interlayer types on heat-treated laminated glass
Akdeniz, Verda; Düzgüneş, Arda; Department of Building Science in Architecture (2007)
Glass is an inherrently strong and elastic building material that allows the enclosure of spaces to provide both comfort and æsthetic appeal. It is evidently due recognition of these properties that has resulted in the current propensity to use it in ever larger sizes; and then with minimumif not total absenceof visible supporting structure. It is, however, its lack of plastic behavior under stressleading to catastrophic failure without warningthat has been the main drawback preventing its use as a structur...
Citation Formats
İ. Sökmen, M. Ünal, and R. Turan, “Cam yüzeyi desenlemesi için bir solüsyon ve uygulanması,” 00, 2016.
METU IIS - Integrated Information Service open@metu.edu.tr