Stability of a monorail car with emphasis on change of center of gravity and short-time of gyroscope.

Date

1973

Author

Yıldıran, Halil Orhan

Metadata

Show full item record

Item Usage Stats

61
views

0
downloads

URI

https://hdl.handle.net/11511/7051

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

Stability of Open-Top Cylindrical Steel Tanks with Primary Stiffening Ring under Wind Loading ZEYBEK, ÖZER; Topkaya, Cem; Rotter, J Michael (2021-09-01)
Stability of a Compass Gait Walking Model with Series Elastic Ankle Actuation Kerimoglu, Deniz; Morgul, Omer; Saranlı, Uluç (2015-07-31) Passive dynamic walkers exhibit stable human-like walking on inclined planes. The simplest model of this behavior is the well known passive compass gait (PCG) model, which consists of a point mass at the hip and two stick legs. Due to their passive nature, these systems rely on a sloped ground to recover energy lost to ground collisions. A variety of methods have been proposed to eliminate this requirement by using different actuation methods. In this study, we propose a simple model to investigate how seri...
Stability of laterally unsupported shear links in eccentrically braced frames Özkılıç, Yasin Onuralp ; Zeybek, Ozer; Topkaya, Cem (2021-12-01) I-shaped links in eccentrically braced frames (EBFs) are susceptible to lateral or lateral torsional buckling when subjected to cyclic link rotations. Lateral bracing should be provided at the ends of the I-shaped links in order to prevent these failures. Requirements for such braces are available in widely used design specifications such as the AISC Seismic Provisions for Structural Steel Buildings (AISC341-16) and EC8. These requirements limit the use of I-shaped links in bridge piers and elevator shafts....
Stability of Unsteady MHD Flow in a Rectangular Duct Tezer, Münevver (2018-06-29) In this study, the time dependent and coupled magnetohydrodynamic (MHD) flow equations are solved in the cross-section of a rectangular pipe (duct) by using the radial basis function approximation (RBF). The MHD studies electrically conducting fluids in the presence of a magnetic field. It has wide range of industrial applications such as MHD generators, MHD pumps, plasma physics and nuclear fusion [1]. The velocity and the induced magnetic field are obtained by approximating the inhomogeneities using thin ...
Stability of steel frames builtup with plate girders Aksoy, Zeki; Keyder, Engin; Department of Civil Engineering (1999)

Citation Formats

H. O. Yıldıran, “Stability of a monorail car with emphasis on change of center of gravity and short-time of gyroscope.,” Middle East Technical University, 1973.