An active peripheral jet suspension system.

Date

1974

Author

Özbakir , Ethem

Metadata

Show full item record

Item Usage Stats

51
views

0
downloads

URI

https://hdl.handle.net/11511/7080

Collections

Graduate School of Natural and Applied Sciences, Thesis

Suggestions

OpenMETU
Core

A fully transistorized torque DC drive. Tohumcu, Müjdat; Department of Electrical Engineering (1979)
A two-dimensional digital position control system. Özdamar, S Ferhat; Department of Electrical Engineering (1976)
An automatic startier for three-phase induction motor. Rivzi, Hussain Shahid; Department of Electrical Engineering (1975)
An FPA based BLDC motor control system Uygur, Serdar; Güran, Hasan Cengiz; Department of Electrical and Electronics Engineering (2012) In this thesis, position and current control systems for a brushless DC (Direct Current) motor are designed and integrated into one FPGA (Field Programmable Gate Array) chip. Experimental results are obtained by driving the brushless DC motors of Control Actuation System of a guided missile. Because of their high performance, brushless DC motors are widely used in Control Actuation Systems of guided missiles. In order to control the motor torque, current controller is designed and implemented in the FPGA. P...
An all 50 ohm divider/combiner structure Turan, Emin; Demir, Şimşek (2002-01-01) A novel microwave power divider/combiner structure is presented in this paper. The analysis of the structure is based on the exact matching conditions at input/output ports and a perfect isolation condition between the dividing/combining arms (ports). To analyze the structure, the necessary set of nonlinear equations is derived first, and then solved. For a special case an all-50 Ω structure is obtained (the characteristic impedances of the transmission line sections and the value of the isolation resistanc...

Citation Formats

E. Özbakir, “An active peripheral jet suspension system.,” Middle East Technical University, 1974.