Determination of plastic properties and anisotropy parameters of some ferrous and non-ferrous materials , produced in Turkey, at elevated temperatures.

1974
Sıvacı, Kenan
Show full item record
160
views
0
downloads
https://hdl.handle.net/11511/7086
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Determination of the flotation characteristics of several Turkish bituminous coal seams in Zonguldak coal basin.
Özbayoğlu, Gülhan; Erten, M. Hayri; Department of Mining Engineering (1977)
Determination of physical and chemical properties of oleogels prepared with olive oil and olive-based emulsifier
Erinc, Hakan; Okur, İlhami (2021-04-01)
This study aimed to investigate the use of olive-based emulsifier (OBE), as an oleogelator, in the production of olive oil oleogels and to determine some physical and chemical properties of oleogels. For this purpose, olive oil was mixed with a different ratio of OBE (0.5%-10% wt/wt), and analyses of minimum gelation concentration, gelation time, oil-binding capacity, and stability of oleogels were undertaken. In addition, free fatty acid, peroxide value, color analysis, and textural properties of oleogels ...
Determination of surface and flotation properties of Mazıdağı phosphate rock
Kavlak, M Serkan; Özbelge, H. Önder; Bayramlı, Erdal; Department of Chemical Engineering (1998)
Determination of kinetic parameters and hydrogen desorption characteristics of MgH2-10 wt% (9Ni-2Mg-Y) nano-composite
Pourabdoli, Mehdi; Raygan, Shahram; Abdizadeh, Hossein; Üner, Deniz (2013-09-10)
Hydrogen desorption kinetic parameters of MgH2 compounds were measured and compared with published gas solid reaction models. The compounds investigated in this study were as-received MgH2, ball milled MgH2, and MgH2 ball milled with 9Ni-2Mg-Y catalyst compound. It was determined that different models were necessary to fit the hydrogen desorption data collected at different temperatures on the same sample, indicating that desorption mechanisms changed with respect to temperature. Addition of (9Ni-2Mg-Y) all...
Determination of the tensile fatigue properties of pleain concrete by indirect tension tests.
Tokyay, Mustafa; Department of Civil Engineering (1980)
Citation Formats
K. Sıvacı, “Determination of plastic properties and anisotropy parameters of some ferrous and non-ferrous materials , produced in Turkey, at elevated temperatures.,” Middle East Technical University, 1974.
METU IIS - Integrated Information Service open@metu.edu.tr