Application of computer simulation model in the estimation of computer the optimum seaport size

Download
006756.pdf
1989
Özkan, Esin
Show full item record
50
views
0
downloads
https://hdl.handle.net/11511/7122
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Application of risk management process on wave propagation in aerospace medium
Konukcu, Selda; Tulunay, Yurdanur; Department of Aerospace Engineering (2006)
In this thesis, risk management methods are investigated in order to integrate risk management practices into the Turkish Aerospace industry. The research presents the sequence of risk management processes as identification of risk, analysis of risk, risk planning etc. Risk analysis methods named as Risk Ranking and Analytical Hierarchy Process (AHP) are investigated in order to improve reliability and safety of the systems or processes in the aerospace industry. The main aim of using risk ranking and AHP t...
Application of geographic information system in earthquake loss estimates
Nuraliyev, Iskander; Polat, Gülkan; Department of Civil Engineering (1999)
Application of VOF and k-ε turbulence model in simulation of flow over a bottom aerated ramp and step structure
Tokyay, Talia; Kurt, Can (Academy of Science of South Africa, 2019-4-30)
<jats:p>A three-dimensional numerical model of ANSYS, Fluent (2011) was employed for studying mid to high discharge supercritical two-phase flow over a single slope spillway with a single step for aeration of the flow. In this study 18 simulations were conducted using the Volume of Fluid (VOF) method for air-water interface tracking and simple k-ɛ model for turbulence closure. Submerged circular shaped pipes located at the bottom of the step were utilized as aerators. Analyses concentrate on the air-entrain...
Application of spatial h ∞ control technique for active vibration control of a smart beam
Ömer Faruk, Kırcalı; Yaman, Yavuz; Volkan, Nalbantoğlu; Şahin, Melin; Fatih Mutlu, Karadal (null; 2007-06-04)
This study presents the design and implementation of a spatial H∞ controller for the active vibration control of a cantilevered smart beam. The smart beam consists of a passive aluminum beam (507x51x2mm) and eight symmetrically surface bonded SensorTech BM500 type PZT (Lead-Zirconate-Titanate) patches (25x20x0.5mm). PZT patches are used as actuators and a laser displacement sensor is used as sensor. The smart beam was analytically modelled by using the assumed-modes method. The model only included the first...
Application of evolution strategy algorithm to generator parameter estimation problem
Şahin, Cem; Erkmen, İsmet; Department of Electrical and Electronics Engineering (2003)
Citation Formats
E. Özkan, “Application of computer simulation model in the estimation of computer the optimum seaport size,” Middle East Technical University, 1989.
METU IIS - Integrated Information Service open@metu.edu.tr