Determination of Assembly Averaged Homogeneous Neutron Cross Sections for MITR II

Date

2000-12-01

Author

Tarı, İlker

Metadata

Show full item record

Item Usage Stats

34
views

0
downloads

URI

https://hdl.handle.net/11511/72295

Collections

Unverified, Conference / Seminar

Suggestions

OpenMETU
Core

Determination of absolute transport efficiencies of Be, Cd, In, Pb and Bi for electrothermal vaporization sample introduction into an inductively coupled plasma using an in-line electrostatic precipitator Ertaş, Gülay (Elsevier BV, 2003-09-26) A novel laboratory-constructed electrostatic precipitator for the determination of analyte transport efficiencies from a tube furnace electrothermal vaporization (ETV) sample introduction system is described. This simple experimental set up captures the analyte electrostatically using a negative corona discharge. The absolute transport efficiencies using experimental conditions typical of those applied to real analysis by ETV-ICP-MS were determined for Be, Cd, In, Pb and Bi to be 26 +/- 3, 39 +/- 8, 35 +/- ...
Determination of isothermal Austenite Grain Growth model parameters for SAE 8620H Carburizing steel Yıldız, Seçil; Yılmaz, Hasan; Yazır, Büşra; Evcil, Eilf; Şimşir, Caner; Davut, Kemal (null; 2016-12-01) Carburizing treatments involve longer holdings at the austenite region, which can produce a range of different prior-austenite grain sizes (PAGS) depending on the growth behavior. The PAGS influences hardenability, phase transformation kinetics and hence the final phase fraction; and therefore the final mechanical properties. Since the high-temperature austenite structure is transformed during subsequent cooling steps, controlling the formation of desired austenitic structure during carburizing treatment is...
Determination of Displacement Amplification Factors for Chevron BRBFs Bozkurt, Mehmet Bakır; Özkılıç, Yasin Onuralp; Topkaya, Cem (null; 2017-10-05) Buckling restrained braced frames (BRBFs) can be used as a lateral load resisting system in high seismic regions. In the United States it is necessary to comply with the requirements defined in the Seismic Provisions for Structural Steel Buildings (AISC341- 10) for the design and production of BRBs. In addition, response factors defined in Minimum Design Loads for Buildings and Other Structures (ASCE 7-10) should be utilized. In this study, deflection amplification factor (Cd) is evaluated. Pursuant to this...
Determination of current transport characteristics in Au-Cu/CuO/n-Si Schottky diodes Surucu, O. Bayrakli; Güllü, Hasan Hüseyin; Terlemezoglu, M.; Yildiz, D. E.; Parlak, M. (Elsevier BV, 2019-10-01) In this study, the material properties of CuO thin films fabricated by sputtering technique and electrical properties of CuO/n-Si structure were reported. Temperature-dependent current-voltage (I-V) measurement was carried out to determine the detail electrical characteristics of this structure. The anomaly in thermionic emission (TE) model related to barrier height inhomogeneity at the interface was obtained from the forward bias I-V analysis. The current transport mechanism at the junction was determined ...
DETERMINATION OF MODE II FATIGUE CRACK GROWTH BEHAVIOR IN RAILWAY STEELS Gürbüz, Rıza(2013-12-31) DETERMINATION OF MODE II FATIGUE CRACK GROWTH BEHAVIOR IN RAILWAY STEELS

Citation Formats

İ. Tarı, “Determination of Assembly Averaged Homogeneous Neutron Cross Sections for MITR II,” 2000, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/72295.