Life-cycle analysis of flexible pavements using the highway design and maintenance standards model (HDM-III) and aashto concepts.

1989
Arman, Mucahit
Show full item record
49
views
0
downloads
https://hdl.handle.net/11511/7253
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Life assessment of a stationary jet engine component with a three-dimensional structural model
Gözütok, Tanzer; Akgün, Mehmet A.; Department of Aerospace Engineering (2004)
In this thesis, fatigue life of a stationary component of F110-GE-100 jet engine is assessed. Three-dimensional finite element model of the component itself and the neighboring components are modeled by using a finite element package program, ANSYS, in order to perform thermal, stress and fracture mechanics analyses. Coupled-field (thermal-stress) analysis is performed to identify fracture-critical locations and to describe the stress histories of the components. After determining the critical location, fra...
Life-Cycle Assessment Based Decision Support System Model for Early Design Phase of Mass Housing Projects
Kayaçetin, Nuri Cihan; Tanyer, Ali Murat (2017-09-08)
Life cycle assessment (LCA) of different concrete mixtures and an application in a green building
Tükenmez, Elif; Dilek, Filiz Bengü; Department of Environmental Engineering (2019)
Concrete is the most utilized building materials on a global scale. Raw materials and energy are required in high quantity for the production phase of the concrete which mainly consists of cement, aggregate, water and admixtures. This causes significant environmental concern for the sustainable development of the building sector. Therefore, environmental impact assessment studies conducted for concrete production are gaining importance, over the last two decades. Life Cycle Assessment (LCA) is the most effe...
Life cycle assessment of building materials in hotel refurbishment projects: a case study in ankara
Çakmaklı, Ayşem Berrin; Elias Özkan, Soofia Tahira; Department of Architecture (2007)
Buildings generate millions of tons of greenhouse gases, toxic air emissions, water pollutants and solid wastes that contribute to negative environmental impacts. Life Cycle Assessment (LCA) is a methodology for assessing the environmental performance of products over their life time. However, many building products are discarded much before the end of their service life, especially as a result of refurbishment and renovation projects. The need for such projects is increasing because most buildings are not ...
Life cycle assessment of a basic external drywall system in Turkey
Akgül, Çağla; Özcelik, Gökçe (null; 2014-10-24)
The construction sector, being one of the greatest consumers of raw materials, has been under the spotlight for many years in parallel to the increased environmental awareness. Specifically, building of walls are of critical importance. For each wall element, there are different manufacturing steps; but, in general, the emissions from a wall element are dominated by one or two manufacturing steps. For example, for concrete, both energy use and calcination in cement manufacturing are in focus; for clay brick...
Citation Formats
M. Arman, “Life-cycle analysis of flexible pavements using the highway design and maintenance standards model (HDM-III) and aashto concepts.,” Middle East Technical University, 1989.
METU IIS - Integrated Information Service open@metu.edu.tr