MİAKMİMeKKSMGMMim.Ar Ortak Sunuşu

Date

2017-11-17

Author

Şahin Güçhan, Neriman

Metadata

Show full item record

Item Usage Stats

127
views

0
downloads

URI

https://hdl.handle.net/11511/72739

Collections

Unverified, Conference / Seminar

Suggestions

OpenMETU
Core

MOCVD büyütme metodu ve teorisi İmer, Muhsine Bilge (null; 2008-05-08)
Detection and localization of drones in MIMO CW radar Yazıcı, Ayhan; Baykal, Buyurman; Department of Electrical and Electronics Engineering (2023-1) Low radar cross section and capability to fly at low speeds make drones challenging targets for radar detection. In the presence of ground moving targets, the frequency spectrum is also crowded which makes the detection of the drones more difficult. Micro-Doppler effect is the main feature used to discriminate drone from other targets and clutter. Typically, discrimination is performed after the detection of all the targets. Especially in target dense environments, such as cities, typical approach requires ...
Development of a parylene bonding based fabrication method for MEMS gravimetric resonant based mass sensors Gökçe, Furkan; Külah, Haluk; Department of Electrical and Electronics Engineering (2017) This thesis reports development of a parylene bonding based fabrication method for MEMS gravimetric resonant based mass sensors that are integrated with microfluidics for real-time detection when there is a liquid flow through the microfluidic channels. Parylene bonding has been optimized by conducting several bare bonding experiments. The optimized bonding takes place at 250ºC, in vacuum (1 mTorr) and with 2000 N of vertical piston force for 1 hour. The average shear bonding strength is 15.58 MPa for the o...
MİKRODALGA REAKTÖRDE METANOLÜN BUHARLI REFORMLANMASINDAN HİDROJEN ÜRETİMİ Sezgi, Naime Aslı(2017-12-31) MİKRODALGA REAKTÖRDE METANOLÜN BUHARLI REFORMLANMASINDAN HİDROJEN ÜRETİMİ
Compensation methos for quasi-static acceleration sensitivity of MEMS gyroscopes / Gavcar, Hasan Doğan; Azgın, Kıvanç; Department of Electrical and Electronics Engineering (2014) This thesis presents the quasi-static acceleration compensation methods for a fully decoupled MEMS gyroscope. These methods are based on the utilization of the amplitude difference information between the residual quadrature signals on the differential sense mode electrodes to sense the static acceleration acting on the sense mode of the gyroscope. There are three different quasi-static acceleration compensation methods presented in this thesis. In the first method, the static acceleration is measured by co...

Citation Formats

N. Şahin Güçhan, “MİAKMİMeKKSMGMMim.Ar Ortak Sunuşu,” 2017, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/72739.