Effect of Cu addition on the microstructural constituents and mechanical properties of twin roll cast AlFeMnSi alloys

2015-01-01
Meydanoglu, Onur
Birbaşar, Onur
Ulus, Ali
Beyhan, Bariş
Kalay, Yunus Eren
In this study, the effect of copper addition on microstructural evolution, mechanical and corrosion properties of twin roll cast (TRC) AlFeMnSi alloy system mainly used in container foil applications was investigated. Microstructural characterization studies were conducted on as-cast, homogenization annealed and final products by employing optical and scanning electron microscopes. The mechanical properties of the samples obtained from compositional were determined at the thickness of final product by tensile and Erichsen tests. Addition of Cu improved mechanical properties and formability performance of the foil products with the contribution of final annealing parameters. Corrosion properties were also improved as compared to those of the AlFeMnSi alloys having lower Cu content
Light Metals 2015 - TMS 2015 Annual Meeting and Exhibition (15 - 19 Mart 2015)

Suggestions

Effect of surface treatment on electrical conductivity of carbon black filled conductive polymer composites
Koysuren, Ozcan; Yesil, Sertan; Bayram, Göknur (Wiley, 2007-06-05)
Two different types of surface modifiers, 3-aminopropyltriethoxysilane and formamide, were applied to carbon black (CB) particles to lower electrical resistivity of polymer composites prepared by treated CB. Two different matrices, low-density polyethylene and nylon 6, were chosen to compound with surface modified CB. Surface energy of CB was increased by adding amine or amide functional groups during surface treatment of CB. According to electron spectroscopy for chemical analysis (ESCA), chemical modifica...
Effect of swaging on microstructure and tensile properties of W-Ni-Fe alloys
DURLU, NURİ; Caliskan, N. Kaan; Bor, Sakir (Elsevier BV, 2014-01-01)
The objective of this study was to investigate the effect of swaging on the microstructure and tensile properties of high density two phase alloys 90W-7Ni-3Fe and 93W-4.9Ni-2.1Fe. Samples were liquid phase sintered under hydrogen and argon at 1480 degrees C for 30 min and then 15% cold rotary swaged. Measurement of microstructural parameters in the sintered and swaged samples showed that swaging slightly increased tungsten grain size in the longitudinal direction and slightly decreased tungsten grain size i...
Effect of expandable graphite on flame retardant, thermal and mechanical properties of thermoplastic polyurethane composites filled with huntite&hydromagnesite mineral
Guler, Turkan; Tayfun, Umit; Bayramlı, Erdal; DOĞAN, Mehmet (2017-01-10)
The effect of expandable graphite (EG) was studied on the flame retardant, thermal and mechanical properties of thermoplastic polyurethane (TPU) containing huntite&hydromagnesite (HH). According to the flammability tests results, the synergistic interaction was observed between HH and EG. The maximum limiting oxygen index (LOI value was observed at a ratio of 1:1 (HH:EG) and the highest vertical burning test (UL-94) rating of V0 was observed at a ratios of 4:1, 3:2 and 1:1. The synergistic interaction betwe...
Effect of microcapsulated red phosphorus on flame retardant, thermal and mechanical properties of thermoplastic polyurethane composites filled with huntite&hydromagnesite mineral
ATABEK SAVAŞ, Lemiye; Deniz, Tugba Kaya; Tayfun, Umit; DOĞAN, Mehmet (2017-01-01)
The effect of microcapsulated red phosphorus (mRP) was studied on the flame retardant, thermal and mechanical properties of thermoplastic polyurethane (TPU) composites containing Huntite&hydromagnesite (HH). The flame retardant properties of TPU based composites were investigated using limiting oxygen index (LOI), vertical burning test (UL 94), thermogravimetric analysis (TGA) and mass loss calorimeter. The mechanical properties of composites were studied using tensile test and dynamic mechanical analysis (...
Effect of carbon nanotube surface treatment on the morphology, electrical, and mechanical properties of the microfiber-reinforced polyethylene/poly(ethylene terephthalate)/carbon nanotube composites
Yesil, Sertan; Bayram, Göknur (2013-01-15)
The aim of this study is to investigate the effects of carbon nanotube (CNT) chemical properties, CNT content, and molding temperature on the morphology, electrical, and mechanical properties of the microfiber-reinforced polymer composites. These composites were prepared by extrusion and hot stretching the poly(ethylene terephthalate) (PET)/CNT phase in high density polyethylene (HDPE) matrix. Surfaces of the CNT were modified by purification with strong acid mixture (HNO3 : H2SO4 mixture 1 : 1 by volume) f...
Citation Formats
O. Meydanoglu, O. Birbaşar, A. Ulus, B. Beyhan, and Y. E. Kalay, “Effect of Cu addition on the microstructural constituents and mechanical properties of twin roll cast AlFeMnSi alloys,” presented at the Light Metals 2015 - TMS 2015 Annual Meeting and Exhibition (15 - 19 Mart 2015), Florida, Amerika Birleşik Devletleri, 2015, Accessed: 00, 2021. [Online]. Available: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84942898526&origin=inward.