Investigation of fatigue characteristics of a bellows-type valve.

1966
Feke, hadi
Show full item record
133
views
0
downloads
https://hdl.handle.net/11511/7337
Graduate School of Natural and Applied Sciences, Thesis

Suggestions

Investigation of asymmetric gear tooth bending stress formulation
Orak, Mahir Gökhan; Akkök, Metin; Department of Mechanical Engineering (2018)
An asymmetric gear has different pressure angle and base radius for the drive and coast side tooth flanks. A standard is not available to determine the bending stresses of external and internal asymmetric spur gears, although there are international standards to determine the bending stresses of external and internal symmetric spur gears. The main objective of this thesis is to determine the bending stresses of the external and internal asymmetric spur gears. The tooth thickness of a gear tooth at the criti...
Investigation of thermal behaviour of building walls under perriodic outside temperaure variations by electrical analogy.
Günay, Ismail Hakkı; Department of Mechanical Engineering (1976)
Investigation of the effect of cleaning medium velocity and temperature on the corrosion of steel.
Ünsal, Atilla; Department of Chemical Engineering (1987)
Investigation of fracture behavior of steel/steel laminates
Şimşir, Mehmet; Öztürk, Tayfur; Department of Metallurgical and Materials Engineering (2004)
A study is carried out into fracture behavior of steel/steel laminates both experimentally and through finite element analysis (FEM). The laminates produced by hot pressing consisted of low carbon and medium carbon steels with two volume fractions; 0.41 and 0.81. Fracture toughness, JIC has been measured using partial unloading technique assuming a critical value of crack extension. The technique is initially applied to monolithic material and then to the laminates in crack divider orientation. Evaluation o...
Investigation of steady and peeriodic heat flow through composite walls.
Qayyum, Mohammaad Abdul; Department of Mechanical Engineering (1969)
Citation Formats
h. Feke, “Investigation of fatigue characteristics of a bellows-type valve.,” Middle East Technical University, 1966.
METU IIS - Integrated Information Service open@metu.edu.tr