Nutrient Removal and Greenhouse Gas Mitigation Using Microalgal Culture

Erguder, Tuba Hande
International Workshop on ‘Green Biotechnology’ (2015)


Nutrient removal and value added product formation from wastes via struvite precipitation (STRUVITE)
Demirer, Goksel Niyazi(2011-1-31)
The major goal of the proposed research is the investigation of the applicability of struvite precipitation technique (SPT) separately or coupled with in an anaerobic digester for recovering nutrients from the anaerobic digestion process (ADP) residues. Optimising SPT will not only improve the performance of ADP which is the most commonly used process for disposing many agro-industrial wastes, in terms of reduced the nutrient (nitrogen and phosphorus) loads discharged to natural aquatic environments, but al...
Nutrient Removal and Recovery from Anaerobic Digester Effluent by Struvite Precipitation
UYSAL, AYLA; Yılmazel Tokel, Yasemin Dilşad; Demirer, Goksel N (2014-11-12)
Nutrient removal from domestic wastewater by pure (Cholorella vulgaris) and mixed algal cultures
Öğüt, Gece Cansu; Çakırlar, Burak; Kaymak, Barış; Bayramoğlu, Tuba Hande; Uludağ-Demirer, Sibel; Kaya, D; Demirer, Göksel N (2013-10-11)
Moisture absorption of composites with interfacial storage
Güloğlu, Görkem Eğemen; Hamidi, Youssef K.; Altan, M. Cengiz (2020-07-01)
© 2020 Elsevier LtdThermosetting polymer composites are often exposed to wet and humid environments, leading to a considerable reduction in their thermo-mechanical properties. Hence, accurate description of the moisture absorption dynamics, including anomalous effects such as molecular bonding and interfacial storage of moisture, is particularly important. In this study, the hindered diffusion model is extended to include the moisture storage at the interface of impermeable fibers or inclusions within the c...
Resource efficient and cleaner production in selected foundries through environmental performance evaluation
Usta Benli, Ayça; Demirer, Göksel Niyazi; Department of Environmental Engineering (2017)
The main objective of this study was to develop Resource Efficient and Cleaner Production (RECP) measures for the ferrous foundry sector. For this purpose, environmental performance evaluation and benchmarking studies were conducted in six ferrous foundries. The environmental performance was calculated by using environmental performance indicators of specific energy and water use, metal yield and sand regeneration ratio. The gap between the benchmarks and actual performances revealed the improvement potenti...
Citation Formats
T. H. Erguder, “Nutrient Removal and Greenhouse Gas Mitigation Using Microalgal Culture,” presented at the International Workshop on ‘Green Biotechnology’ (2015), Kocaeli, Türkiye, 2015, Accessed: 00, 2021. [Online]. Available: