Catalytic methane conversion to methanol on Cu-SSZ-13

Date

2018-08-10

Author

İpek Torun, Bahar

Metadata

Show full item record

Item Usage Stats

77
views

0
downloads

URI

https://hdl.handle.net/11511/74662

Conference Name

Tokyo Conference on Advanced Catalytic Science and Technology, (5 - 10 Ağustos 2018)

Collections

Unverified, Conference / Seminar

Suggestions

OpenMETU
Core

Catalytic conversion of methane to methanol on Cu-SSZ-13 using N2O as oxidant İpek Torun, Bahar (2016-01-01) Direct catalytic methanol production from methane is achieved on Cu-SSZ-13 zeolite catalysts using N2O as the oxidant. The methanol production rate on Cu-SSZ-13 (on a per gram basis) was more than twice the rate on Cu-mordenite and more than four times the rate on Cu-ZSM-5.
Catalytic Conversion of Methane to Methanol over Iron-Exchanged Zeolites Gökçe, İklim; İpek Torun, Bahar (2021-09-09)
Catalytic partial oxidation of methane to formaldehyde Akbulut, Barış; Önal, Işık; Department of Chemical Engineering (2000)
Catalytic combustion of ethyl acetate GÜRMEN ÖZÇELİK, TUĞBA; Atalay, Sueheyda; Alpay, Erden (Elsevier BV, 2007-01-01) The catalytic combustion of ethyl acetate over prepared metal oxide catalysts was investigated. CeO, Co2O3, Mn2O3, Cr2O3, and CeO-Co2O3 catalysts were prepared on monolith supports and they were tested. Before conducting the catalyst experiments, we searched for the homogeneous gas phase combustion reaction of ethylacetate. According to the homogeneous phase experimental results, 45% of ethylacetate was converted at the maximum reactor temperature tested (350 degrees C). All the prepared catalysts were test...
Catalytic degradation of polypropylene over alumina loaded mesoporous catalysts Obali, Zeynep; Sezgi, Naime Aslı; Doğu, Timur (2012-10-01) The catalytic thermal degradation of polypropylene over aluminum containing ordered mesoporous MCM-41 and SBA-15 based materials was studied in a semi-batch reactor. Heavier molecules degraded to lighter hydrocarbons in the presence of catalysts and they gave high ethylene selectivity among the gaseous products. Additionally, butane selectivity increased with the use of catalysts. SBA-type catalysts showed higher selectivity to lighter hydrocarbons (<C-14). C-7 selectivity among the liquid products was high...

Citation Formats

B. İpek Torun, “Catalytic methane conversion to methanol on Cu-SSZ-13,” Yokohama, Japonya, 2018, p. 100, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/74662.