Proposed cycle counting method for thermal strains in integral bridge steel H-piles

Date

2018-09-28

Author

Dicleli, Murat

Metadata

Show full item record

Item Usage Stats

42
views

0
downloads

URI

https://hdl.handle.net/11511/75326

Collections

Unclassified, Article

Suggestions

OpenMETU
Core

Proposed cycle counting method to estimate fatigue damage in integral bridge steel h-piles Dicleli, Murat (2018-08-03) Several cycle counting methods exist in the literature for the study of fatigue damage generated in structures. Level Crossing, Peak, Simple range and Rainflow counting methods are those using the stress and deformation range to count the number of cycles. Close examination of the existing field measurement data for integral bridges revealed that the measured cyclic strains in steel H-piles consists of large amplitude, primary small amplitude and secondary small amplitude cycles. However, the above mentione...
Proposed minimum restoring force equations for seismic isolated structures Görgülü, Ali Günalp; Dicleli, Murat; Department of Engineering Sciences (2019) In this research study, a new set of restoring force equations are proposed for seismic isolated structures subjected to far fault ground motions (FFGM) and near fault ground motions (NFGM). For this purpose, 110 FFGM and 49 NFGM are selected. Then, nonlinear time history analyses (NLTHA) of SDOF seismic isolated structures are performed using the selected ground motions to obtain their residual and maximum displacements. The analyses are repeated for an extensive range of parameters including peak ground a...
Proposed Seismic Retrofitting Method for Bridges with Multiple-Column Bents Dicleli, Murat (2004-05-01)
Proposed elastic-gap device for performance improvement of seismic-isolated bridges near active faults Dicleli, Murat (2018-08-03)
Preliminary ground motion model for subduction earthquakes based on NGA-Sub Japan database Gülerce, Zeynep (2018-06-28) This manuscript presents the preliminary ground motion model (GMM) for the subduction zone earthquakes based on the database collected from Japanese earthquakes within the frame of PEER Next Generation Attenuation: Subduction (NGA-Sub) project. The dataset used in the regression includes 5730 recordings from 56 subduction interface earthquakes with 5.16≤Mw≤9.13 and 4503 recordings from 27 intra-slab events with 5.2≤Mw≤8.32. Functional form of the model accommodates the differences in the depth and distance ...

Citation Formats

M. Dicleli, “Proposed cycle counting method for thermal strains in integral bridge steel H-piles,” 2018, Accessed: 00, 2021. [Online]. Available: https://hdl.handle.net/11511/75326.